Jump to content
SAU Community

New Spark Plugs= Missfire

camoo

By camoo,
in General Maintenance

 Share

Recommended Posts

camoo Collaborator

camoo

Posted
Posted

I have a 98 r34 gtt, 3"turbo back, FMIC, boost controller running 12psi.

while doing the 100k service, i took out its denso iridium IK20 plugs with a gap of 1.1

and replaced them with NGK bcpr6es gapped to .8

Now it misses at idle and a little when accelerating lightly up to 2000rmp, but is fine when driving normally and when hammering it.

I played around with the gapping and the smaller ther gap the worse it is, but even at 1.2, the miss at idle remains.

Its not running lean, ive checked coils, airflow meter and for any vacuum leaks, all that aside,

the miss dissapears when i put the iridiums back in....

Im stumped, my mechanic is stumped...

I know i could just run the iridiums, but there must be something causing this, and its driving me nuts....

Could it be injectors?

Any help please??

Link to comment
https://www.sau.com.au/forums/topic/361819-new-spark-plugs-missfire/
Share on other sites
mad082 Grand Master

mad082

Posted
Posted

put the old plugs back in. if the miss goes away then you no it's am issue with the plugs. if the issue stays then i think you will find that the issue is with the coils. may have been a bit dodgy before hand and in the process of changing the plugs the got damaged and now they are worse.

camoo Collaborator

camoo

Posted
  • Author
Posted

Sounds like my issue i have just changed my injectors..

Sounds like its on 5 cylinders if you gently rev it..

yes thats what mine sounds like, did the injectors help?

just buy the stock plugs n gap them too .7 or.8, cheap as fu*k and will probs fix your problem n near last as long as iridium plugs- i think they are

BCPR6ES-11

tried that, didnt help

put the old plugs back in. if the miss goes away then you no it's am issue with the plugs. if the issue stays then i think you will find that the issue is with the coils. may have been a bit dodgy before hand and in the process of changing the plugs the got damaged and now they are worse.

tried that, different only iridiums make it go away, also swapped my coils witha new set to test, made no difference

Maybe you dislodged some crud and it dropped into one cylinder?

blew it all out with compressor before i removed plugs, and it goes away with iridium plugs

thanks though eveyone.... :s

camoo Collaborator

camoo

Posted
  • Author
Posted (edited)

Is ur ecu tunable? Some skylines do this. Its like an intermittant lean pop at idle?

If it annoys u just richen up the idle a tiny bit or keep running the iridiums if thats what ur car likes.

as far as i am aware its still the standard ecu as it has the sticker/seal on it.

im the first oz owner too, i think they have to make sure the ecu is standard when going through compliance... unfortunately lol

and yes it sounds like a lean pop, but my tuner put it on the dyno and its still rich, runs safe allthrough the rev range with a smooth power curve.

:(

im ok with running iridiums... but still i really wanna know why its doing this.. is this common at all?

Edited by camoo
camoo Collaborator

camoo

Posted
  • Author
Posted

Alot of skylines have lean pop at idle intermittantly.

I normally richen the idle until the popping stops.

Why it happens with certain plugs i honestly cant answer that.

hmmm driving through the city today i can notice it while going slow.... very annoying....

and its already running rich...

ill put iridiums back in and see how it runs...

any more ideas though?

The.Godfather Enthusiast

The.Godfather

Posted
Posted

did you drop one of the plugs when fitting them? they are fragile things and can get damaged easily...

but yeah throw your old ones in, even if its one by one and see if the missfire at idle goes away.

camoo Collaborator

camoo

Posted
  • Author
Posted

did you drop one of the plugs when fitting them? they are fragile things and can get damaged easily...

but yeah throw your old ones in, even if its one by one and see if the missfire at idle goes away.

na didnt drop any,and even then, i went and bout another set of the NGKs just to be sure.

Also tired replacing plugs 1 at a time, and untill its all iridium, it still misses....

cheers though..

camoo Collaborator

camoo

Posted
  • Author
Posted

so im going to try the o2 sensor in the exhaust....

Not to sure if this will have to much of an affect but with my limited knowlede i believe this is a logical step...

Any one agree or not?

help???? lol

camoo Collaborator

camoo

Posted
  • Author
Posted

NOTHING TO DO WITH THE O2 SENSOR!!!!!!

Standard Iridium plug is a (NGK) heat range 5, I believe. Try some BCPR5ES plugs, see what happens.

yeh is did nothing tring another o2 sensor, so good call...

i got some ngk iridiums to put in tomorrow, just annoying that everine else with this same angine and same mods can run standard copper plugs, yet mine wont...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
    • GTSBoy
      Speed Sensor replacement

      By GTSBoy · Posted

      Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...