Jump to content
SAU Community

Recommended Posts

Hi guys,

I have R33 GTST INTEROIR parts that are lying around and am looking to off load them at DIRT cheap prices.

I will be very firm with my prices, as they are already very cheap

Depending on the item and how many you are taking off my hands,

I MAY CONSIDER Reasonable/Fair offers, (low-ballers and time wasters will be ignored) & possible delivery at buyers expense.

***WILL DO TRADE FOR SERIES 2 BONNET*** in good condition

All parts can be PICKED UP FROM SOUTH MORANG, MELBOUNRE, 3752

Let me know if you are interested in anything... You can PM me, sms or call me, as I am not on this site very often.

Thanks, Ben 0422 782 888

INTERIOR PARTS UP FOR GRABS...

R33 Front pillars, with factory tweeter speaker cover and under bracket for tweeter, Excellent condition $60

series 1 Driver door card $20

series 1 Passenger door card $20

series 1 Left rear card (the above interior panel around window is not available) $10

series 1 Right rear card (the above interior panel around window is not available) $10

ALL 4 FOR $50

series 1 front Driver seat, in very good condition (no tears/wear) $80

series 1 front Passenger seat, in very good condition $30

series 1 Rear seat, Faded on top, but in very good condition $20

ALL Series 1 Seats FOR $100

Series 2 rear seats, Excellent condition $50

Series 1 Dash, Very good condition $30

Series 1 Floor Mats, Good condition (driver worn a little) $15

Series 1 Glove Box and lower part of dash it sits in, Very good condition (just dirty in picture) $15

Series 1 Center Console, (elbow rest) with leather hand brake boot, good condition $20

Boot carpet pieces, sides only (L+R), factory cut for rear strut brace $20

Series 1 FLOOR CABIN CARPET $30

AND SERIES 1 PASSENGER SIDE HEADLIGHT, LITTLE FOG $60

Series 2 wing/spoiler WHITE, Good condition $30

PLUS all little DASH parts (the electrics, hazards, rear demister door mirror switchs, clocks, etc) EACH... $5

Items are in South Morang 3752, Victoria.

Get in quick... cause at these prices they won't last long! First in best dressed!

Call, text, or PM me on 0422 782 888

Cheers, Ben

P.S WILL DO TRADE FOR SERIES 2 BONNET in good condition

post-62246-0-85686500-1303652156_thumb.jpg

post-62246-0-82063000-1303652350_thumb.jpg

post-62246-0-89934500-1303652469_thumb.jpg

post-62246-0-07728700-1303652610_thumb.jpg

post-62246-0-90146400-1303652731_thumb.jpg

post-62246-0-13537300-1303652827_thumb.jpg

post-62246-0-21185100-1303652947_thumb.jpg

post-62246-0-82240900-1303653069_thumb.jpg

post-62246-0-64439100-1303653161_thumb.jpg

post-62246-0-70849800-1303653427_thumb.jpg

Do you have the plastic piece that goes along your knees in the drivers seat. The plastic with the hole for the fuse box

Yes I do, but missing the fuse box cover...

Don't need fuse box cover mate. Will you post?

Cheers

Well, would prefer you to come along, but if you want it delivered, there would be a two day delay before i hit the post office, how much you willing to pay?

Ben

  • 1 month later...

Hi there,

I am after the center console and the demister button, are they taken? also i would want shipping to Queanbeyan 2620, is that all good?

Thanks

Will

hey man if your not will to post to queesnland^^, i am also interested in the center console, aswell as the part infront of it, the gear shift surround and boot

  • 2 months later...

ALOT OF PARTS FREE, FREE, FREE... :yes:

Hi guys,

I have R33 GTST INTEROIR parts that are lying around and am looking to off load them for FREE or at DIRT cheap prices.

I will be very firm with my prices, as they are already very cheap

(low-ballers and time wasters will be ignored) & possible delivery at buyers expense.

***WILL DO TRADE FOR SERIES 2 BONNET*** in good condition

All parts can be PICKED UP FROM SOUTH MORANG, MELBOUNRE, 3752

Let me know if you are interested in anything... You can PM me, sms or call me, as I am not on this site very often.

Thanks, Ben 0422 782 888

INTERIOR PARTS UP FOR GRABS...

R33 Front pillars, with factory tweeter speaker cover and under bracket for tweeter, Excellent condition $60

series 1 Driver door card $FREE

series 1 Passenger door card $FREE

series 1 Left rear card (the above interior panel around window is not available) $FREE

series 1 Right rear card (the above interior panel around window is not available) $FREE

series 1 front Driver seat, in very good condition (no tears/wear) $40

series 1 front Passenger seat, in very good condition $30

x2 series 1 Rear seats, Faded on top, but in very good condition $FREE

ALL Series 1 Seats FOR $50

Series 2 rear seats, Excellent condition $20

Series 1 Floor Mats, Good condition (driver worn a little) $FREE

Series 1 FLOOR CABIN CARPET $FREE

AND SERIES 1 PASSENGER SIDE HEADLIGHT, LITTLE FOG $20

Series 2 wing/spoiler WHITE, Good condition $FREE

PLUS all little DASH parts (the electrics, hazards, rear demister door mirror switchs, clocks, etc) $FREE

Items are in South Morang 3752, Victoria.

Get in quick... cause at these prices they won't last long! First in best dressed!

Call, text, or PM me on 0422 782 888

Cheers, Ben

P.S WILL DO TRADE FOR SERIES 2 BONNET in good condition

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...