Jump to content
SAU Community

R32 4 Door.

leigh4110
 Share

Recommended Posts

leigh4110 Apprentice

leigh4110

Posted
Posted

hey all,

I have my 1990 HCR32 4 door for sale. it has 205,xxx klms on the shell, I have only owned it for about 3 months now.. I'm selling to fund my next japan trip and to fund another project.

anyway, here is a list of mods.

- RB20det rebuilt at 110, 000 kms

- Gearbox rebuild at 161,000 kms

- Dr drift Remapped ECU

- Aftermarket roller bearing turbo, 440 hp rating

- Turbosmart bleed valve boost T

- Adjustable HKS cam gears

- Splitfire coils

- return flow Front mount intercooler

- 3 inch custom turbo back exhaust with highflow cat and Varex muffler

- New exhaust manifold studs and gasket

- Cusco oil catch can

- Walbro Fuel pump

- Excedy heavy duty cushion button clutch

- Cusco 2 way mechanical diff

- RBA slotted discs all round

- Front Project mu street pads, Rear Bendex ultimate

- Cusco brake master cylinder stopper

- jap spec Tien super street Coilovers

- Noltec Subframe bushes

- Noltec Sway bar bushes

- Gtr rear sway bar

- Front and rear strut braces

- Cusco adjustable castor arms

- Cusco upper front (camber) suspension arms

- Hicas lock bar

- Varex Muffler

- Weds Farmas rims 17 x 8jj fronts 17 x 9jj rears (rear wheels hand polished by me. look pretty awesome)

- 25mm bolt on spacers front and 8mm slip on spacers rear.

- HID Headlights ( projector/low beam)

- steering rack spacers

Interior

- Nardi wheel with Sparco quick release boss kit

- Blitz boost gauge

- Apexi turbo timer

- GTR Seats

IMG_0317.jpg

IMG_0324.jpg

IMAG0028.jpg

IMAG0027.jpg

IMG_0320.jpg

IMG_0337.jpg

Personally I'd love to keep this car, In the 3 months i've owned the car, I've changed all the gaskets on the head (bar the head gasket), serviced it, flushed all the fluids and replaced them and a few other bits and pieces..the RWC only recently ran out but is fine to pass another one! the car runs perfectly, gearbox has no crunches or grinds, diff is quiet, perfectly streetable car. my intentions were to build a 25/30 for it but I have another project in mind now.. the car makes 194rwkw at 1bar on Dr drifts dyno with Injectors being the limiting factor.

only issue with the car is the drivers side front qtr is rippled due to the previous owner having the car too low and the tires pulled the guard in.

sold with NO RWC (will pass one easily through my mechanic just needs to be raised and put the airbox back on) but will have a couple months reg. possibly 6/12 months pending sale price.

any questions, don't hesitate to call Leigh on 0418-221-075.

$9000 negotiable. throw me some offers!

Link to comment
https://www.sau.com.au/forums/topic/362503-r32-4-door/
Share on other sites
  • 7 months later...
Slow4door Collaborator

Slow4door

Posted
Posted (edited)

I'm looking unto selling this now but has had a fair bit done since I bought it!

I've replaced clutch master/slave, serviced, fixed leake's, fitted new air filter, fitted gtr 444cc injectors, removed the chip and had a nistune fitted and tuned to 19.8psi via a Eboost street boost controller,now it has on dmdtuning's dyno 240rwkw! I've also got a guard that still needs painting to fix the guard on drivers front, the car has had new rear breaks done, I've changed the wheels to sparco racing 5 spoke wheels 17x8 17x9, changed boost gauge to turbosmart psi, fitted a momo steering wheel, new black floor mats worth $$, so all in all I paid 9000 and I've spent another 4000ish so I'm looking to sell for around 11000ono

Edited by Slow4door
Link to comment
https://www.sau.com.au/forums/topic/362503-r32-4-door/#findComment-6157384
Share on other sites
  • 4 weeks later...
  • 2 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 2 months later...
  • 2 weeks later...
Slow4door Collaborator

Slow4door

Posted
Posted

http://datsun1200.com/modules/newbb/viewtopic.php?topic_id=54345&forum=8&post_id=406173#

http://www.ebay.com.au/itm/Nissan-Skyline-R32-gtst-sedan-1990-Rb20det-240rwkw-Nistune-nismo-drift-race-/180877812971

Link to comment
https://www.sau.com.au/forums/topic/362503-r32-4-door/#findComment-6348591
Share on other sites
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      What accelerator cable can be used with greddy plenum

      By Duncan · Posted

      I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • V36
      What accelerator cable can be used with greddy plenum

      By V36 · Posted

      HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...