Jump to content
SAU Community

Recommended Posts

hey, i got a problem with my rb20det when you are about to come on full boost it starts missing and not running right, and from a stand still when u put the foot down it dose the same thing, starts missing, but if u ease the power on gently and stay under 3k it is happy and runs fine??? can anyone help

Link to comment
https://www.sau.com.au/forums/topic/362597-rb20det-missing-on-boost-help/
Share on other sites

In terms of checking them, somewhere dark/nighttime is best and you would normally see them arc out on to the engine....

Other than that do you run std boost? Checked/changed plugs recently?

hey, i got a problem with my rb20det when you are about to come on full boost it starts missing and not running right, and from a stand still when u put the foot down it dose the same thing, starts missing, but if u ease the power on gently and stay under 3k it is happy and runs fine??? can anyone help

also its really hard to start, like it takes 10 goes to get it running and when it fires it splutters for couple seconds then runs idles fine?

Edited by andyyyyyyyyyyyyyyyyy

check the spark plugs as well. pull them out, look at the colouring as well as get a feeler gauge to measure the gap. also inspect the coils for any signs or melting, etc (that's a sign they are arcing out). if they all seem fine then the issue may be fuel related and it might be worth putting the car on a dyno to get them to check the AFR's.

i put new plugs in today didnt change anything and coil packs look fine and i looked at them at night time and i didnt see anything arcing out.....

check the spark plugs as well. pull them out, look at the colouring as well as get a feeler gauge to measure the gap. also inspect the coils for any signs or melting, etc (that's a sign they are arcing out). if they all seem fine then the issue may be fuel related and it might be worth putting the car on a dyno to get them to check the AFR's.

i put new plugs in today didnt change anything and coil packs look fine and i looked at them at night time and i didnt see anything arcing out.....

Just thought, maybe you have the ignitor separate from the coils??? If yes that could be faulty.....

yeah the rb20 has a seperate ignitor and they do cause problems that are the same symptoms as dodgy coils. one major advantage is that if you have a mate with a rb20 or s1 rb25 then you can swap them over to try in just a few mins (much easier than swapping coils)

true, i just need a mate with a rb20 :D, so u also think it would be the coil packs that is making it not want to start straight away when its cold? takes a couple of gose to get it to fire up

yer fix it completely now i cleaned my AFM and it was covered in oil......

if that helped then it means that your coils are stuffed. new coils should make it a lot better.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...