Jump to content
SAU Community

Recommended Posts

Hey guys, I found Chasers deal on my newsletter as I am subscribed to www.g2gdeals.com

They are doing this $300 value service for $150. Here are more details

· Coupon valid from 9th May 2011 to 31st July 2011 at Chasers Motorworks.

Service package includes:

· Motul 300V engine oil ($26/litre up to 5 litres)

· Oil filter (valued up to $15)

· Martini Racing brake / clutch fluid (valued $36, up to 1 bottle top up)

· Castrol power steering fluid (valued $12, up to 1liter top up)

· Coolant top up (valued up to $30 for 3litres)

· Labour for general inspection, change oils, and top up fluids (valued up to $80)

Here is the website http://g2gdeals.com/

I just did a service but tempted to buy for next service :)

Enjoy!

I believe it's the one in West Melbourne as there is no 'Eastside' written in the offer?

hahaha ended up buying one, as the stupid 300v doesnt come in 5lt bottle, so i have to buy 6lt which is about $150 anyway.

free labour + martini racing brake&clutch fluid + coolant top up + check up etc. not bad not bad :laugh:

Eastside one is in Mitcham.

The main branch one is usually packed of skylines (mostly gtrs) and evos,

while the eastside one I believe is usually packed with silvia boys.

Manny, the owner uses silvia :)

jesse and tom know GTR well...i take mine there...

good blokes...

Yeah I take my car to both workshop, Eastside is less busy so it's pretty easy to book in.

Anyone else bought the coupon and want to use it together? but mine is due very soon, so i'll do it maybe early next week.

And it valids for 3months so im thinking to buy another one for my next service :happy:

Edited by gerz

Thanks Lav + Michael. :cheers:

Wow mitcham is pretty close to me so there good at eastside with GT-R s also is pricing same?

We try to keep pricing the same, but at Eastside we give a 10% labor discount to SAU members. :)

Jesse is a top bloke for sure.

Jess, next time I'll go there I wouldn't want to buy drinks in that bottle shop again, the chick hassled me a lot, she thinks I look like under 25 and asked me for license, gave her my international one, she doesn't want to accept it until I asked for a manager :angry:

  • 3 weeks later...

Looks like they are doing it again. I have no idea whether you can work it out to be part payment for major service, maybe call them?

I booked my car for this week yayyyy :)

here is the link btw http://g2gdeals.com/team.php?id=73

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...