Jump to content
SAU Community

Recommended Posts

I have recently picked up a V35. In the past i have just gone to dealers for servicing as my cars were new and still under warranty so it was just easier and most of my mods i installed myself as they were just the basic bolt ons. I know of the big names like xspeed and c-red etc. and have heard good and bad from alot of workshops over time so id like to know the latest on whos good in perth.

Im specifically looking for somewhere that i can go to for everything on a long term basis. I just think its better to try go back to the same place so they know you and your car etc. and try build up some trust. I want a workshop that is happy to do general servicing as well as future mods and tuning, preferably one with a dyno.

At the moment i want a very good check up done prior to my 3month dealer warranty thing expiring, so preferably a workshop who is very familiar with the car so they know exactly what to look for on this model. Im wanting to see if theres anything thats not so obvious that needs fixing so i can get it sorted before i start modifying.

I have been thinking C-Red but thats mostly because they offer all these things and are a name i know, but as to how good they are i have no clue so is there anywhere people recommend and have had good long term experiences with?

I dont mind paying more for quality work but at the same time i dont want to get ripped for a half assed job so any info would be appreciated.

Edited by Ben-88

For the V35 a good choice also to C-RED is www.autoworkshop.com.au as they do a lot of V35's and now a few V36's, the guys service to manufacture's recommendations and do a lot so they know what to look for.

For regular services you can get the while you wait service as they have a lounge area set up with TV and everything to wait in.

hey this is sorta semi on topic - there's a gull on flinders street..

next to the servo - is a garage.

is that garage - is always an entire fleet of drift S13s, Ma61 supras, Z10 soarers, Ke70's.. skylines and all sorts of JDM goodness...

anybody know what the story is there???

anyway: some other names that i'll throw out that i've heard great things about:

All star Garage

WTFAuto (for toyota only)

hyperdrive

Rocket Thumb garage

to be totally honest - i've heard and seen workshops go from being totally famous and having a bulletproof repotoir to being out of business and having their name dragged through the dirt over the ten or so years that i've been "in the scene"

won't name names there but those who will know will think of at least four big names that just f**ked up...

..but yeah - hyperdrive is the cockroach of the WA tuning and mechanic scene.

a comet, a plague, a famine, a swarm of locusts, financial crisis and the four horsemen of the bible can come down and swipe down EVERYONE ON THIS EARTH...

...but hyperdrive will continue to operate. they will still tune cars, they will always pick up the phone. they will always provide advice and great customer service.

they will survive anything that the world can throw at them, like a cockroach they just soldier on and do their thing.

(not to say that hyperdrive are ANYTHING like an acutal cockroach - just saying they're REALLY in this for the long haul!)

  • 4 weeks later...

As i get closer to needing to get the service done, im deciding between hyperdrive and autoworkshop. I have holidays comming up so im going to go check out a few places and see what the workshop looks like and have a chat with them to see who i want to go with, but at this point it looks like it will be hyperdrive because they seem to offer everything i want, have a decent rep and are the closest to where i live out of all the "good" workshops.

dont want to be a fizz in the cup but a service is a service

if some think something is stuffed on your car and you dont know much about how your combustion engine works then you sould not be think to much about it

a car is a car ever motor works on four stroke system

if you take your car to a mech in one place for a service you will only get a oil change and check over just like every workshop in perth

it doesnt take a good mechanic to drop oil and change a oil filter

use your money wisely oil's are oils

hahahah sorry dont want to wreck your dreams of kick ass workshops but they are as good as the bloke working on your pride and joy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not a problem at all Lithium, I appreciate your help regardless. I've pulled a small part of a log where the target pressure was 28psi and it spiked to 36.4psi. I've only just begun using Data Log Viewer so if I'm sending this in the wrong format let me know.
    • Sorry had a bit of a week and haven't had heaps of time to follow this, so apologies if I've missed something - any chance of showing a log with the rpm, turbo speed, MAP, and wgdc all in one view? Definitely an "interesting" problem, and while it's definitely worth noting that there was a similar issue with the twins I'd not completely put all bets on the root cause being the same thing.  Keep an open mind, follow the data.
    • I built this engine approximately 12 years ago so my own head (brain) is a little grey on the exact hardware in the RB head, however what I recall is. Stock RB25 NEO TURBO Intake Camshaft HKS 260 degree Exhaust Camshaft (R34 GTR) RB25 NEO Turbo Springs  I ported/removed the exhaust stud humps found in the RB25 head so theres less turbulence but it wasn't ported/polished properly, just a hump removal. I've attached two pictures of the before and after to illustrate.     The ECU gets its boost reference from the nipple on the rear of the head on the intake side, behind the fuel rail. The wastegate gets its boost reference from a nipple on the cooler pipe immediately after the comp cover.  Could a decent pressure drop across the intercooler cause the wastegate to be seeing a higher PSI than what the ECU is seeing, and thus it can't control it accurately and quick enough?   We ran a line to the actuator and watched it open and close using an air compressor, while we didn't have a gauge on the line to see when it was cracking open, it was opening smoothly.  I just removed the gate now and even though the documentation says you need to open it in a vice due to preload (which I did), there wasn't any preload on the cap, which is something we noticed straight out of the box as well when new. This silver cap internally is threaded to the actuator rod that runs out the bottom of the straightgate. Not sure how I'm supposed to get this spring out to be frank.. Potentially but everyone else doesn't appear to have to stop at 500kw because of 6boosts design.  I would, but I think I'm getting to that point where if I'm going to do the head and make another 100kw, then I'm going to need a fancy gearbox and quite a few other things and 10k becomes 20k becomes 30k within a few months. I'm not necessarily sold on the idea just yet that the head is restrictive at 4000rpm (and what.. 300kw?) and yet doesn't seem to be restrictive at 7000rpm when it's making 500kw, however I'm obviously not closing the door on that theory.
    • Yeah - Half the problem is I know this sensor actually goes to 150C.. I'm pretty certain it is min of 11C. So still more data required I suppose. It's really quite hard to get the oil temp to 100+ then immediately pull over and take a reading before the temp drops. Annoyingly I suppose the range I really 'want' is likely 80 -> 120C. TBH the ecu can't really *do* anything with it, and the gauge itself is very visible... ...but you know how it is.
    • My EFR 8474 Black, made 800awhp on a roller dyno. at 25-26psi. E85. Shaft speed was around 106,000rpm 1.01 rear. The rear is maxed.  6 boost Turbosmart 60mm gate 3.5inch exhaust  Head is worked to the shithouse. Bain racing. VCam. 272 exhaust. RB28 - RB26 foundation.  You have an intake issue. Start getting proper data and I mean go back to the simple things.  - Pressure test your intake - Block off the Turbo BOV, you don't need it.  - Test pressure before and after your intercooler If your head is pretty stock, that is your issue. Especially if it is NA.  Take it off and spend $10k on it. 
×
×
  • Create New...