Jump to content
SAU Community

Recommended Posts

Have a pair of white r32 doors not sure if gtst or gtr but I think they are the same anyway.

Doors are not in great condition, have been sitting outside for some time and have rust on bottom and where the mirrors bolt on.

Drivers has the little power window control box thing.

Both doors have glass in decent condition, power window mechanism, Im assuming the motors and the mirrors.

Happy to separate if people need.

Make me an offer on whatever parts you want.

If anyone wants photos or anything let me know.

I am in north eastern suburbs of Melbourne.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/362722-r32-doors-mirrors-glass/
Share on other sites

Robbie,

RHD window - does the glass have any scratches?

Also, how much?

Les . . .

____________

Have a pair of white r32 doors not sure if gtst or gtr but I think they are the same anyway.

Doors are not in great condition, have been sitting outside for some time and have rust on bottom and where the mirrors bolt on.

Drivers has the little power window control box thing.

Both doors have glass in decent condition, power window mechanism, Im assuming the motors and the mirrors.

Happy to separate if people need.

Make me an offer on whatever parts you want.

If anyone wants photos or anything let me know.

I am in north eastern suburbs of Melbourne.

Cheers,

Les,

Both window have the little vertical scratches that you generally get from the outside rubber getting bits of dust in it, but no major scratches. Also so you know they have some type of tint on them. As for the price how does $40 sound?

Side mirrors - $50 for the pair

Seal - Hrmm, are you talking one inside the door or the one on the B pillar, If there is one inside the door it may be there. The one on the pillar no.

If yous want any photos let me know.

Cheers,

Robbie

I had a quick look at the window seals then. There is one at the back which looks like it forms into the door seal itself. and also one at the front (next to mirror).

These are both there and seem in decent condition.

If you give me a photo of what your after I can confirm further?

Cheers,

Robbie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...