Jump to content
SAU Community

Recommended Posts

Hi All,

Up for sale is my R32 Skyline GTST.

It has 107,000 kms

100k major service has recently been done, replaced water pump and all belts etc etc.

as well as at 105k service

Engine is running perfect

It will come mostly stock with RWC and Rego until March 2012.

Will come with a full exhaust and FMIC.

Very clean car with good paint and no tears on any of the seats.

Right now is has the following mods, which i can keep on for an extra price.

All parts are currently working in the car.

PERFORMANCE

-Cusco Zero Coilovers

- Ms Strut Brace

- Electronic Boost Controller (HKS EVC)

- GTR Sway Bars

- K&N Pod Filter

- HKS Turbo Timer

SOUND SYSTEM

- Alpine Type X Sub (with custom box built especially for R32 boot) – 1000 watts RMS<br style=""> <br style="">

- Alpine MonoBlock – 1000 Watts RMS

- Rockford Fosgate Punch Amp

- MB Quart Premium 6.5" and tweeters

- Zero Gauge Cables and stinger RCA

- 1 farrod Cap

- MB Quart Discus 6X9

OTHER STUFF

-Boost Gauge<br style=""> <br style="">

-Yellow Top Battery

- Front Rims – Volk GTC 18 X 9 +22 (in chrome which is rare) – 70% Maxxis tyres<br style=""> <br style="">

- Rear – Work VSKF 18 X 10 +33 – 90% Federal tyres

- viper alarm with 2 way pager.

BAD POINTS

The centre console is missing an ash tray and has a few cracks (all cosmetic)

Easily replaced and fixed, may even be able to do for you.

Any questions please call or text

0402 759 408

post-72035-0-21914900-1304250472_thumb.jpg

post-72035-0-11513100-1304250517_thumb.jpg

  • 2 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...