Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I'm extending the deadline for payments for a few more days, just in case anyone else would like to join.

I have been asked if this is open to 4 door owners; Yes guys, everyone!

Please PM ASAP if you wish to join.

Cheers, Dale.

Heyyyy

Dale I think there has been a mix up with the sway bars.

(anyways I had a fat post written out but my page refreshed and lost it all before i could send /wrists so here is a quick summary)

The front sway bars I have received seem to be the front sway bars for the G37 not the V35.

My front sway bars : -

P1040088.jpg

Now here is a picture from the whiteline website of their g37 front sway bar: BNF41Z

BNF41Z.jpg

Now here is a picture from whiteline for the V35 sway bar I should have received. BNF33Z

BNF33Z.jpg

Ok so what the funny thing is on my sway bar it has a sticker of BNF33z like the sway bar above but obviously my sway bar is not the one above.

P1040090.jpg

Now to conclude, in your group buy the front swaybar code you gave us was Front; BNF35Z, now i searched all of whiteline and not one item came up with this item number. So I think whiteline has f**ked up and given you the wrong sway bars or something fishy is going on because the original price quoted from you was $320 but on whiteline the front sway bar for the v35 is $335 now. Either they sent you old stock or there is just a fat mixup. Anyone else pull up this problem that bought sway bars from you or did i pick the wrong sway bars up from you ><, hope you can get back to me soon =D

Thanksss George

George.

o shit .......... that last post was meant to be a PM......../facepalm

Jawrgy; Sorry abut the delayed reply, didn't get on the forum last night. I'll address your points individually;

1; "in your group buy the front swaybar code you gave us was Front; BNF35Z, now i searched all of whiteline and not one item came up with this item number"

100 percent my fault, that's a typo that I didn't spot; Correct Part Number is BNF33Z.

2; "Now here is a picture from whiteline for the V35 sway bar I should have received. BNF33Z"

BNF33Z.jpg

Absolutely right; however the angle that the photograph is taken also hides the detail of the bends contained in the centre section of the bar.

This picture here; post-61153-0-36309100-1307737713_thumb.jpg and more specifically this one; post-61153-0-84845900-1307737870_thumb.jpg

are probably better at demonstrating the true shape of the V35/Z33 Front Sway Bar, and the reason for the particular shape.

Both of these images were found in Google Images by typing "V35 Sway Bar"

I commend you for doing a bit of dectective work before panicking, and your panic is understandable. I hope the pics will put your mind at ease.

If necessary, I can meet up with you over the long weekend; we'll remove the undertray from you car, and confirm the fit.(I just need somewhere flat to lay my extended ramps.)

3; "So I think whiteline has f**ked up and given you the wrong sway bars or something fishy is going on because the original price quoted from you was $320 but on whiteline the front sway bar for the v35 is $335 now."

I don't believe there's been a mix up; but I'll happily explain the price hike; I have a great relationship with my supplier, (who; I might add, is a great guy) and that relationship allows me to purchase at excellent prices. This then allows me to pass those savings on to you. Surely you would be happy with that kind of saving?

If anyone has an issue with fitment or quality; please let me know, I can be contacted on 0410 691143.

I trust this clears up any concerns about the Group Buy; I really pride myself on being upfront and honest with this sort of thing, it's really important to me that you guys are happy with the end result.

Kind Regards, Dale.

Well mine is sitting at my aunts place so as im still in Bali i hope mine are ok!!!!

Can you confirm Dale if others are ok?

Everyone has a PM.:thumbsup: Enjoy your hoilday mate.:cheers:

I should have added this to my reply; :whistling:

Of course, if there is any issue with the compatibility of the Sway Bars; They will be replaced with the correct ones for no additional charge.

Regards, Dale.

I should have added this to my reply; :whistling:

Of course, if there is any issue with the compatibility of the Sway Bars; They will be replaced with the correct ones for no additional charge.

Regards, Dale.

Heyyyy

Im happy with that. I did a bit more searches and the hotchkins that Im getting in are the exact same shape as the ones from whiteline. Its just the picture for the BNF33Z is very deceiving from the whiteline website.

BNF33Z.jpg

Thanks for the quick and speedy reply Dale and 10/10 service, Very Happy =D

Edited by jawrgy
  • 1 month later...

So..... wondering how everyone went with their Sway Bar setup with these whiteline bars, mine will be going on soon and keen to hear your feedback.

Which settings did you use?did you like the improvement?

Cheers

J

So..... wondering how everyone went with their Sway Bar setup with these whiteline bars, mine will be going on soon and keen to hear your feedback.

Which settings did you use?did you like the improvement?

Cheers

J

Hey mellow man, mine are amazing, i used medium setting in the back, soft in the front. Took me 3hrs to install as i too my time. Most of it was jacking the car up and placing stands..

They have not only improved braking but handling is so much better, friends following me though mountains say car has no body roll and just sits so nicely on the road!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...