Jump to content
SAU Community

Trying To Work Out Rear Housing I Have

t04z

By t04z,
in Engines & Forced Induction

 Share

Recommended Posts

t04z Collaborator

t04z

Posted
Posted

just trying to work out what the rear housing is on my turbo as i want to replace it with something bigger its only a .63 its a hybrid turbo so these are the numbers on the rear housing

Garrett

m1 63

01404

13016

9526-937

any help would be great if not can i just cork out the wheel size and trim and order a housing to suit??

t04z Collaborator

t04z

Posted
  • Author
Posted

And you put it on a 3L?

maxx boost @ idle amitright?

haha yea thats why i want to get a bigger rear housing made 450rwkw on an sr20

pretty sure it is a 65mm wheel with a 76 trim wheres the best place to get rear housing to your specs?

StealthX Veteran

StealthX

Posted
Posted

haha yea thats why i want to get a bigger rear housing made 450rwkw on an sr20

pretty sure it is a 65mm wheel with a 76 trim wheres the best place to get rear housing to your specs?

Unless it's a Garrett GT series, HKS etcc... you'd find it VERY hard to find replacement housings for such a turbo.

I'm curious as to where you think you'd be able to "order" a rear housing? They're not the sort of thing like springs or pistons, where you can give specs and they'll machine one up for ya...

If it made that much power there's no chance it's a factory turbo, odds are it's one of these t04e knock offs: http://www.turbobygarrett.com/turbobygarrett/catelog/Turbochargers/BB/T3T4R_757197_4.htm

There's heaps floating around on the net that copy this design, very popular for no name "eBay" turbos. Search for "T3/T4 turbo" on eBay, see for yourself.

p.s. what's a hybrid turbo?

t04z Collaborator

t04z

Posted
  • Author
Posted

Unless it's a Garrett GT series, HKS etcc... you'd find it VERY hard to find replacement housings for such a turbo.

I'm curious as to where you think you'd be able to "order" a rear housing? They're not the sort of thing like springs or pistons, where you can give specs and they'll machine one up for ya...

If it made that much power there's no chance it's a factory turbo, odds are it's one of these t04e knock offs: http://www.turbobyga...4R_757197_4.htm

There's heaps floating around on the net that copy this design, very popular for no name "eBay" turbos. Search for "T3/T4 turbo" on eBay, see for yourself.

p.s. what's a hybrid turbo?

plenty of places u can order rear housing for hybrid just means its a bit of everything really it was custom made for the bloke i got it off from a bloke down here its got all sorts off different brand stuff in it i just want to get a bigger rear housing for it

GTScotT Grand Master

GTScotT

Posted
Posted

It appears to be some sort of older tech garrett unit, I found some yanks talking about one of the PNs on a US based forum yet stating different trim sizes to your own.

Regardless, if it did 450rwkw on an SR20 theres no way its going to be choking the 3L, simple as that really.

If you want a guaranteed result, your better off buying something else that suits the manifold you already have. If you are yet to make a manifold and were going to make one to suit this turbo, give up while your ahead and start over. The world is your oyster.

As stated, the AR is almost a pointless number to gauge without knowing the turbos specs. To the point that, more 35Rs run .63 rears without issue than 30Rs do and they are actually the same housing on both.

t04z Collaborator

t04z

Posted
  • Author
Posted

It appears to be some sort of older tech garrett unit, I found some yanks talking about one of the PNs on a US based forum yet stating different trim sizes to your own.

Regardless, if it did 450rwkw on an SR20 theres no way its going to be choking the 3L, simple as that really.

If you want a guaranteed result, your better off buying something else that suits the manifold you already have. If you are yet to make a manifold and were going to make one to suit this turbo, give up while your ahead and start over. The world is your oyster.

As stated, the AR is almost a pointless number to gauge without knowing the turbos specs. To the point that, more 35Rs run .63 rears without issue than 30Rs do and they are actually the same housing on both.

cheers for that mate maybe i will see how it goes yea i alreay have a hks manifold which is t4 flanged so will just got a t3/t4 adaptor or something sorted. can always change later if i want to i guess

GTScotT Grand Master

GTScotT

Posted
Posted

Do it once do it right.

The HKS manifold is a good thing but if its a low mount rather than a high mount you will not have space to run an adapter. Its hard to fit a turbo under the low mount manifolds as it is. If it is a highmount of some sort again you may be hitting the bonnet with an adaptor in place... BUT, a highmount is likely to be stainless which you could just chop off the flange and put the flange you want on it.

You need to decide two things, how much power and how much money. 300rwkw you will be wasting your time with a T4 flanged turbo, 400+rwkw you will be spending 20grand in total to get there.

If its 300 you want, sell the HKS manifold and get something suitable.. Probably a stock manifold to be honest. If you DO want over 400rwkw, hang onto what youve got and get the right turbo. If its a twin scroll manifold then pick up a T04Z or 3788R. Recent results for the 3788R have been very impressive.

Lets just say your an odd ball and want 350rwkw, you can actually get a T4 35R from GCG for $1450, I would say that is a good option.. However a member has recently found a twin scroll 3788R to be about as responsive as single scroll 35R (on a very built *read expensive* setup).. Again it all comes down to BUDGET.

GL anyway, this forum has more info than you will ever need... If the info is on another forum another member will find it and put it here :P

badhairdave Proficient

badhairdave

Posted
Posted

gt35 turbine exducer is only 2.5.

Newer GT garrets have the flare up to 3 inch on the outlet but the older T series turbos just had a straight outlet off the turbine, the flare had to be made in the first part of the dump.

t04z Collaborator

t04z

Posted
  • Author
Posted

GT35 isnt a 450rwkw turbo though, espesially not on an SR20.

Which is what we're getting at.

Yea that's what I thought but I saw the car it was on and that's what it made. And yea aiming for 400kw its a high Mount manifold will just try an adaptor n see how I go hope it doesn't hit on the bonnet with the 26/30 it's gonna be close I reckon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
×
×
  • Create New...