Jump to content
SAU Community

Recommended Posts

I have a R33 GTR which I use for track days and some weekend use, it is not a daily car.

I am wanting to upgrade the suspension arms and have been looking at some Cusco parts. I have recently been told about the Ikeya parts, but wanting to know if it is really worth it for the extra $$$ . Also, might be a stupid question, but it looks harder to setup Ikeya arms compared to the Cusco ones. Am I right?

These are the Ikeya parts I am looking at getting:

Ikeya:

Adjustable rear lower arms

Front upper link

Rear upper arms

Roll centre adjuster lower kit

Tie rod end

Traction adjuster rod

I am also currently running Tein RA coilovers which I will be getting rebuilt as the rear is knocking

Thanks in advance for your feedback

Link to comment
https://www.sau.com.au/forums/topic/364359-ikeya-suspension/
Share on other sites

Your going to get weekend warriors with good budgets saying ikea stuff is great and some more serious guys too as well as brand whores.

Then the budget conscious saying cusco, etc are just as good

Then the serious racers saying they all need improvements.

Depends what you want from the car and what you want to spend.

You could listen to the guys saying they are great and don't worry when this thread is seen they will come out of the woodwork. (I'd rekon 50% of them dont even own ikea arms, 30% would have them and not even drive the car regularly on the circuit or it's still in a workshop and the last

20% well who knows)

Seriously they work as do most other brands. They do have some refined geometry built into the lower arms but it's nothing to get all wet about.

Money well spent? Not in my opinion but it's yours that matters.

I had cusco arms on my R33 GTR but after awhile of some hard abuse the the Rear Upper Camber Arms Cracked quite badly both sides, and my front cusco castor arms aren't much better, i have bit the bullet and replaced all my arms every single one with the whole entire Ikeya Formula Catalog. Yes they may be expensive but you get what you paided for and the build quality is awesome very solid bits of gear, thats my opinion anyways.

I agree with nur33 you get what you pay for, I have 33 gtr do serious track work and run slicks last thing you want is cheap arms braking.i bought ikeya arms all round years ago and my car gets punished on the track every month,they are still mint.more than enough adjustment in them.

Edited by JGB33

Your going to get weekend warriors with good budgets saying ikea stuff is great and some more serious guys too as well as brand whores.

Then the budget conscious saying cusco, etc are just as good

Then the serious racers saying they all need improvements.

Depends what you want from the car and what you want to spend.

You could listen to the guys saying they are great and don't worry when this thread is seen they will come out of the woodwork. (I'd rekon 50% of them dont even own ikea arms, 30% would have them and not even drive the car regularly on the circuit or it's still in a workshop and the last

20% well who knows)

Seriously they work as do most other brands. They do have some refined geometry built into the lower arms but it's nothing to get all wet about.

Money well spent? Not in my opinion but it's yours that matters.

What do you suggest Risking ?

Custom built to requirements ?

Not nessisarily.

I fitted up a full set of arms to an r32 GTR today. They were Chinese arms, I threw the rod ends in the bin and replaced them with FK ends. Blasted the paint off them and TIG welded some plate gussets into them, re painted them black and fitted them up.

Happy days.

They were a Dam sight cheaper then ikea arms and as strong if not stronger.

Ultimately yes depending on the application you'd fabricate your own specifically for your use, it's not very common practice though as people don't want to spend the money unless it's a fairly serious circuit car

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...