Jump to content
SAU Community

Recommended Posts

I recently did my GTS-R back to factory (see sig for the link to the video, you can see the quality).

Just in trims, moulds, rubbers etc etc was over $2,000 from Nissan brand new.

I couldn't justify putting the 20-25yo trims/moulds/rubbers on a brilliant paint job when restoring a car

So as i said, totally depends on what you want. If you wanted to use the stuff you have now, you'd save such costs but then the body would look like new, yet the plastic/rubber would all be 10-15yrs old, weathered and that type of thing.

You might sand back a panel and find out it's been in some damage, needs repair and all of a sudden you get a $500 extra added on for instance.

I mean some places will just respray the car for $1500 - but don't expect it to be a brilliant job. You will certainly find things you are not happy with, over time the paint can fade/peale tc. But for $1500 you can't complain @ that price.

Only you can decide :)

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5817516
Share on other sites

I recently did my GTS-R back to factory (see sig for the link to the video, you can see the quality).

Just in trims, moulds, rubbers etc etc was over $2,000 from Nissan brand new.

I couldn't justify putting the 20-25yo trims/moulds/rubbers on a brilliant paint job when restoring a car

So as i said, totally depends on what you want. If you wanted to use the stuff you have now, you'd save such costs but then the body would look like new, yet the plastic/rubber would all be 10-15yrs old, weathered and that type of thing.

You might sand back a panel and find out it's been in some damage, needs repair and all of a sudden you get a $500 extra added on for instance.

I mean some places will just respray the car for $1500 - but don't expect it to be a brilliant job. You will certainly find things you are not happy with, over time the paint can fade/peale tc. But for $1500 you can't complain @ that price.

Only you can decide :)

sorry mate i dont no what you meen by the rubbers and stuff

(were can i get one of these 1500 dollar paintjobs from lol)

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5817705
Share on other sites

sorry mate i dont no what you meen by the rubbers and stuff

(were can i get one of these 1500 dollar paintjobs from lol)

I think he is refering to the window seal rubbers etc, and i'd dare say for a decent spray job your looking at least $5,000 +

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5817765
Share on other sites

I think he is refering to the window seal rubbers etc, and i'd dare say for a decent spray job your looking at least $5,000 +

ok thanks mate,

i wouldnt be looking to replace anything like that (just tape them off accurately)

just a sand, prep, prime ect, paint.

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5817777
Share on other sites

do you want a closed door respray (one where when you open the door the inside of the doors is a different colour to the outside of the car) or a proper job where inside the doors, boot, bonnet, etc are all done too? this will determine the price. also depends on whether you want it painted with 2-pack or basic acrylic. this will determine how much of a shine the paint has as well as how resistant it is to chipping, etc.

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5817918
Share on other sites

well ive got these hard plastic door trim that things say skyline on both doors and there quite large so if i decided to go black, being my car is already a dark blue you wouldnt notice the difference to much, i think it wouldnt look to bad seeing as the paint you dont see when you look at my car is the best looking paint on the car, haha.

and it would suit the style of the interior.

Link to comment
https://www.sau.com.au/forums/topic/364588-r33-paint-job/#findComment-5818386
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...