Jump to content
SAU Community

Stagea Cruise Adelaide - Sunday 19 June

RubyRS4
 Share

Recommended Posts

RubyRS4 Grand Master

RubyRS4

Posted
Posted

Righto lads!

Stagea Cruise on the Sunday 19th June 2011. Meet from 9.30am for 10am departure. Meet points (yep, theres two) to be advised and route to be advised on the day. However, I can telly ou that I will have 2 meet points organised: one to cater for the southies, and one to cater for the northies. Both groups will meet at a central (close to city) location for half hour stop for photos, and handout of directions.

We got 20 cars for the last cruise ... but the previous record from over 2 years ago is 25!!! Lets try to get 30 stags out for this. Put this date into your diary!

Please indicate if you will be coming, so I can get messages out for the meeting point and rough route for cruise.

:thumbsup:

Robbie, I'll PM you to give me a hand with the southern group and I'll tackle the northern group until we meet up. ;)

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

Sorry bad weekend for me. I will either have a new son or daughter due then. I'm hoping I can take the stag for a late night high speed run to the hospital when its due.

SatchiThaStagea Community Regular

SatchiThaStagea

Posted
Posted

Sorry Rubes but I'm also in this boat!

Sorry bad weekend for me. I will either have a new son or daughter due then. I'm hoping I can take the stag for a late night high speed run to the hospital when its due.

Got a little girl coming somewhere between 10th-20th.

These Stags are a really fertile vehicle arn't they!

Hey ducati what hospital you going to? Would be spun out if it was the North Eastern!

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

Got a little girl coming somewhere between 10th-20th.

These Stags are a really fertile vehicle arn't they!

Hey ducati what hospital you going to? Would be spun out if it was the North Eastern!

It would be spun out. We just had our refresher there last night. Was really good experience the first time there. Hopefully we beet you to the balcony room :nyaanyaa:

Sorry to turn this into a thread about where we are having babies ruby :thumbsup:

4bidn1 Mentor

4bidn1

Posted
Posted

vote for thread name change to " who's keen to have/make babies on june 19th??":thumbsup:

Ha ha we must be a bit out , Rose not due till 20th of aug oh well , any way not avalible on 20th june ethier i reckon date change is in order! probs best to put it up to poll like we have the last couple of times to ensure best turn out instead of one set date.:thumbsup:

Your AFM probs all sorted roo ?

RubyRS4 Grand Master

RubyRS4

Posted
  • Author
Posted

Ha ha we must be a bit out , Rose not due till 20th of aug oh well , any way not avalible on 20th june ethier i reckon date change is in order! probs best to put it up to poll like we have the last couple of times to ensure best turn out instead of one set date.:thumbsup:

Your AFM probs all sorted roo ?

Bugger ... crap ... f**k ... shit ... dammit ... :P

Alright, disregard this thread. I'll kickstart another with a poll for you difficult bastards! :laugh:

Yeah, AFM issues sorted. Stagea was back on the dyno yesterday for a retune ... ended up very happy with 252.6rwkw @ 16psi (rwd dyno). Front shaft is back in now. Stagea is very different now with good oomph and great delivery of power.

:thumbsup:

4bidn1 Mentor

4bidn1

Posted
Posted

strewth thats high for only 16psi not bad at all :thumbsup: i got just over 232 rwd on 18psi through the auto 219 awd , hmmm cams and 30 bottom end next :whistling: got to stop spending money on the stag though got to finish the 180sx e85 beast :devil:

Big Fella Mentor

Big Fella

Posted
Posted

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

thats no good tangles, you really are having terrible luck at the moment

Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

Did the vandal put something in your fuel to cause the 5th cyl to fail

RubyRS4 Grand Master

RubyRS4

Posted
  • Author
Posted

strewth thats high for only 16psi not bad at all :thumbsup: i got just over 232 rwd on 18psi through the auto 219 awd , hmmm cams and 30 bottom end next :whistling: got to stop spending money on the stag though got to finish the 180sx e85 beast :devil:

Yeah I was happy. Taking my time and making sure I had the right supporting mods in place paid off for slightly bigger numbers. You going to the SAU-SA club dyno day next sunday? My stagea will be ont he rollers to see if she can repeat her 250+ dyno run.

Dont know when my stagea will be back on road. along with the bottom end problem (ringlands) she got vandalized early this morning, graffiti in a variety of areas.

That sucks big time Brendan. f**king low life bastards. What do you mean by "vandalised", just graffiti, or dents and scratches etc too. PM me if you want.

:thumbsup:

4bidn1 Mentor

4bidn1

Posted
Posted

Yeah I was happy. Taking my time and making sure I had the right supporting mods in place paid off for slightly bigger numbers. You going to the SAU-SA club dyno day next sunday? My stagea will be ont he rollers to see if she can repeat her 250+ dyno run.

might pop my head in for a look see how you and big fella are doing but not that into dyno days , hi stall will be in by next weekend so that will kill my dyno numbers even more due to converter slip and not locking up fully on the rollers had same trouble with the vlt, but the stag should launch hard as, make good boost off foot brake :thumbsup: fun for private roads. Good luck with the numbers on the weekend guys if i dont catch up

cheers jase

  • 2 weeks later...
Tommy Kaira RL Mentor

Tommy Kaira RL

Posted
Posted

Im going to Kadina on the Sunday in the GTR for the car show. There is a huge turn out of SAU going from Adelaide this year. You should enter the M35 in would be next to Rubys stag. I usually have my M35 in the shows but this time I want to go in the GTR. Have a look in the SA members section.

P.S See you Sunday :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...