Jump to content
SAU Community

Recommended Posts

What's wrong with yours Matty?

ABS and AWD lights come on upon start up frequently. In the middle of removing the centre console now to check the G-Sensor. The HICAS Light flashes once very quickly upon hard acceleration sometimes. I ran the car in HICAS Diagnostics and it came up no error. The HICAS pump itself is holding fluid above the max line (ignition on or off) and when the ABS/4WD lights are on i cant see any led flashing in the boot to get the error code.

That and one of my AFM's that drops voltage whenever it feels like it, makes me a sad panda..

  • Replies 3.6k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

had same thing with mine matty...was G sensor.

Awesome, I was hoping the repair bill would be in the thousands! Anyone got a g-sensor for me? From a car that didn't suffer serious impact etc. ??

By the way Martin did you get home alright today? Jump starter pack man, gods gift to any daily!

Ha yeah no probs Matty! Btw I got a G sensor second hand in good nick through Grand Auto wreckers at lonsdale...

would have to be mid 13's im guessing

spot on u and damo 13.5 on the banger with a kick ass take off :thumbsup: 1.9 ish 60ft pinch.gif one of the harshest treatments of a manual car i had seen for the day i reckn but did it :unsure:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...