Jump to content
SAU Community

Recommended Posts

I'll let the other attendees post their results if they so choose, for now though, here's mine:

I had a mixed bag yet again, but this time my launches were showing signs of improvement. The track, as I'm sure the other lads will confirm, was very very slippery! The worst I've ever seen!!!

My first pass saw NO traction at ALL in 1, 2, 3 & 4. 190-200km/h across the line sliding all over the place is a very freaky feeling :D

I ran 13.623 @ 112.35 (2.298 60ft) with the wheels spinning the length of the track. I lifted off the throttle a number of times but it made zero difference :) I actually had a to use A LOT of steering input to stay straight.

The second pass wasn't much better, a 13.011 @ 114.73 (2.208 60ft) wheel spin the length of the track again, with a very sideways moment in 3rd! Again I completely lifted my foot of the throttle, but it didn't help 'cause as soon as I tried again... more w/spin ;)

At this point I considered giving up for the night, but thanks to Shaun and Wayne (Boost Worx crew) and some burnout coaching tips from Andy (thanks dude!) I decided to give it one last shot.

The third and final pass for the night was full of stuff ups. Thankfully the burnout coaching from the lads paid off though :) I gave it the best burnout effort I've ever done and actually had a bit of a smoke show happening ( still trying to save the 540's as best as possible). I did however forget to turn the A/C off! It was a tad warm in the car with helmet on etc... so I'd turned the A/C on for a sec or 2, and realised it was still on... on the return road! I still had plenty of wheel spin the length of the track, even the commentator mentioned my complete lack of grip through all gears.

The results of my final run were, 12.654 @ 118.34 (2.141 60ft)

Next time I'll turn the A/C off and hope for better track prep.

Link to comment
https://www.sau.com.au/forums/topic/36549-wed-17th-march-air-drag-results/
Share on other sites

  • Replies 69
  • Created
  • Last Reply

Top Posters In This Topic

Jeeze chill out a tad Martin! Upon re-reading my post above I can see it comes across as I'm having a winge, that wasn't my intention! I was just stating the point that it was (as I expected) quite hard to get grip.

I think it's excellent that AIR run these low cost street car events. Full credit to them.

When funds are available I'll get a set of Nittos. Until then what I've got is fine. As for burnouts, yeah I'm learning. Unlike some I didn't grow up on a diet of burnouts and general hoon behaviour :)

What was that you were saying about... 'quicker ET and possibly slower TS'? :D

ferni,

Unless there's condensation dribbling onto the track they wouldn't know if it was on or not. It's not something I'd normally choose to do.

Robo,

16psi when cold mate. I did an ok burnout, nothing huge though. I used 3,500-4,000 and drove the car off the line. Fed clutch and throttle as I went.

Yeah thanks Matt. Might see you out there on the 3rd?

You read me wrong Matt. Its not an agro thing, just that I see you wasting the potential of the car meet after meet. Beg, borrow, steal some ET streets, cook em hard, till the smoke bags off them. Drop the clutch at 4000rpm and there you have your 11 second pass @ 120mph.

Thanks Dean.

It wasn't that busy at all mate. I sort of figured it was a bit pointless, what with my lack of skill and traction issues, but after Shaun, Wayne & Andy gave me a bit of burnout coaching I decided to give it another shot. I actually managed to show a glimpse of ability too! I ran the 12.6 and then there was an oil down. I didn't bother trying again, was happy enough anyway.

Ahh ok cool, understand you now Martin :D Yep I'll follow your tried and tested method as soon as I get the chance. I'd really like to do it on radial tyres ala HPI style, not that I'm likely to get into the top 10 anyway. I guess it's a personal goal that I've always had. I like the idea of driving out to the track on my everyday rubber (which the 540s are) and running the numbers in the same trim it gets used on the road in.

I agree though... it is time to get serious and run it in a trim that's likely to bring out its best. I'm a crap driver though, so it's still going to take me a few goes :P Having said I did set the 2nd fastest lap outright out of 64 competitors on the go-kart track today :)

Thanks ecenshu.

Dean,

I know Andy ran a few 12.9's (109mph) I don't think he had a PB. Don't know about the others? I didn't see any R33 GT-R's out there at all.

muahahahahahahahahahaahahahahahahaha rofl hahahahahahahaha seeeef Dean .... bleh you'd be lucky to do a 13.5 :)

Yeah I did a best for the night of 12.93, with a 60' of 2.051 and mph of 109.93. The new clutch is very bitey and harsh, but I'm getting used to it. All of my 7 runs for the night were at 109-110mph but my 60' times let me down (did one as high as 2.4). Like Matt I was spinng through every gear as the track was poorly prepared as usual. It is very disoncerting when at about 150km/h at peak power in 4th gear the back end starts letting go and waving around some. It did that basically every run .... I never backed off, but surely the lost traction at the top of each gear was costing me valuable 10ths of seconds.

Was a fun night anyhow.

There was a white R33 there, but he was slow as crap (high 14s all night from memory), and it certainly wasn't a GTR. He didn't blow anything up to my knowledge. Frankz (blue Subaru wrecks) did a driveshaft on one run. A red GTS Skyline (R31 I think - and it had a BIG ARSE turbo) was the culprit of dropping the oil I think. The meet was restricted to one lane for the rest of night after that - and I was 3rd in line to have a run against Ben in his new Blue S15 too :)

yeah mate he did, but it was his first time out there and he did really well. Believe you me .... when you finally get your ass out there, I will be surprised if you can crack a 13 the first outing. It really is a lot harder than it looks and I highly respect guys like John, Keir etc do it under intense pressure and expectation from the crowd. At least when I go out there everyone expects me to screw it up, so I can't let anyone down :)

Hey Andy, you'll be pleased to know that Mark @ Pulsarparts snapped about 4 or so pic's of you from the 17th :)

Go to... www.pulsarparts.com.au select "Local car events" and you'll see the link to the 17th Mar meet.

EDIT: Make that 6 pic's, including the intro money shot! :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
×
×
  • Create New...