Jump to content
SAU Community

Recommended Posts

Just a question and a vote:

Is it possible to make a multi-colour L.E.D conversion to the cluster for the R34 gt? ie the speedo,tacho, and fuel and temp gauge. I know the prelude has the multi coloured cluster which looks awesome!

Also i have a non turbo gt, is it possible to install the centre cluster that is on the gtt onto my gt? Without making it too obvious that i installed it seperatly.

Thirdly, should i, if i cant do a multi coloured L.E.D conversion, make the cluster blue or red?

Thanks, any help is really appreciated.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/
Share on other sites

Just a question and a vote:

Is it possible to make a multi-colour L.E.D conversion to the cluster for the R34 gt? ie the speedo,tacho, and fuel and temp gauge. I know the prelude has the multi coloured cluster which looks awesome!

Also i have a non turbo gt, is it possible to install the centre cluster that is on the gtt onto my gt? Without making it too obvious that i installed it seperatly.

Thirdly, should i, if i cant do a multi coloured L.E.D conversion, make the cluster blue or red?

Thanks, any help is really appreciated.

You could do it, but it won't look good. The cluster is illuminated by several individual bulbs, so you could technically replace these with different coloured LED's. But they will spill over onto each other and won't look good at all.

In regards to the triple gauge cluster, yes it's possible, I have done it to my car. It involves cutting the dash to fit it though, so you have to be game. There is a guide on how to do it somewhere in these forums.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5831236
Share on other sites

LOLL i didnt mean a rainbow coloured cluster, i meant one which I could change the colour to my liking, i dont know if i should get blue or red, so if i could find a way to switch between the 2 it'd be epic.

And thanks for your advice i'll try to get those centre gauges in june, hopefully it wont look half bad :S.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5831537
Share on other sites

LOLL i didnt mean a rainbow coloured cluster, i meant one which I could change the colour to my liking, i dont know if i should get blue or red, so if i could find a way to switch between the 2 it'd be epic.

And thanks for your advice i'll try to get those centre gauges in june, hopefully it wont look half bad :S.

Ohhh lol, misunderstood what you meant by multi-colour :P

It's a bit of a pain in the ass to change the globes, I got blue and want to change to red (bought new gauges that illuminate red so now it doesn't suit), but I can't be arsed. I found it damn annoying because first you gotta get the dash out (not hard, takes 5 mins), then putting in the bubs is guesswork because if you get the polarities wrong then they won't work but they don't have an indicator as to which way they should go. So you have to replace all the bulbs, refit the dash, turn the lights on to see if they work, note which ones don't work, take the dash back out, switch the bulbs around, then do it all over again.

It's not hard, but it's damn frustrating. Especially when the FUCKINGSHITCUNTSONOFABITCH wiring looms in the back of the dash refuse to come out and you bust your finger open with a screwdriver trying to lever the bastard little clips :rant: :rant:

Edited by Hanaldo
Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5832727
Share on other sites

LOOOOOOOOOOOOOOOOOOOOOOOOOLLLLLLLLLLL sounds like fun mate hahahahahahaha, yerhhh, im planning to get blue interior neons, so i may as well make the cluster blue i guess. Ill tell you, in about a months time, when i do it, how it goes.

And at @gimp r34:P i saw a white cluster today which looked pretty sick, so ill try all three combos and see which one looks the best, most likely ill probably go with the blue :-)

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5832905
Share on other sites

Word of advice if you want to try white, it's not straightforward. The factory gauges have a blueish film over them, so when you put white light behind them it actually looks pale blue. Doesn't affect other colours.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5832911
Share on other sites

Word of advice if you want to try white, it's not straightforward. The factory gauges have a blueish film over them, so when you put white light behind them it actually looks pale blue. Doesn't affect other colours.

unless you get a series 2 one which has orange film so the white globes will make it orange and blue globes will be really really really dim

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5833350
Share on other sites

Hi i am Sean from the UK, just changed colour of dash in my R34 GTT to red, sorry for picture quality but you can see what the result would be like. I did not go down the led route instead just got hold of some red bulb sleeves/covers. A far cheaper way cost me £5 to do the lot including triple gauges, ignition and cig lighter and still got a few left. Just got the small switches and the heater displat to sort out now.

post-69240-0-56185500-1306679277_thumb.jpg

post-69240-0-93477700-1306679311_thumb.jpg

post-69240-0-88322900-1306679334_thumb.jpg

post-69240-0-60105900-1306679353_thumb.jpg

post-69240-0-70094300-1306679374_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5839504
Share on other sites

Dude your a legend, thanks for the effort, after seeing those pics im not confused, red looks epic assssss, but i want blue at the same time, motherfcking decesions ;)

Hi i am Sean from the UK, just changed colour of dash in my R34 GTT to red, sorry for picture quality but you can see what the result would be like. I did not go down the led route instead just got hold of some red bulb sleeves/covers. A far cheaper way cost me £5 to do the lot including triple gauges, ignition and cig lighter and still got a few left. Just got the small switches and the heater displat to sort out now.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5840565
Share on other sites

Well if you can get hold of the coloued sleeves and for how long it takes to change them you could change them every now and then, over here they come in red,blue,green and yellow. You could even go multi coloured if you which but then you would have the problem of which colour goes where.

Thanks for your great comments skittles and ishan

:cheers:

Edited by Rapidrider
Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5840787
Share on other sites

Ishan, the triple gauges in mine are the standard ones fitted to the top of the dash, but as i had a factory fitted screen up there which didn't work over here i just removed it and fitted a standard satnav in its place. After removing the head unit for it and regiging the heater control and stereo unit the gauges just fit in after removing the fixing lugs. Finished of with a bit of clear plastic and a bit of trim i painted black. If you need any more info about the triple gauges just let me know i will try and help you if i can. Here are a few pics to show you.

post-69240-0-06375500-1306748502_thumb.jpg

post-69240-0-65298700-1306748529_thumb.jpg

post-69240-0-53986900-1306748555_thumb.jpg

Edited by Rapidrider
Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5840803
Share on other sites

yer those triple gauges look nice, i don't have a screen, an i dont plan on getting one so i wanna see if i can fit the gauges to the position that they are fitted in in the Gtt. Any ideas to make it an easy job? :P

Ishan, the triple gauges in mine are the standard ones fitted to the top of the dash, but as i had a factory fitted screen up there which didn't work over here i just removed it and fitted a standard satnav in its place. After removing the head unit for it and regiging the heater control and stereo unit the gauges just fit in after removing the fixing lugs. Finished of with a bit of clear plastic and a bit of trim i painted black. If you need any more info about the triple gauges just let me know i will try and help you if i can. Here are a few pics to show you.

Link to comment
https://www.sau.com.au/forums/topic/365490-led-conversions/#findComment-5841782
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...