Jump to content
SAU Community

Recommended Posts

Spotted a white R34, Top secret front bar and black GTR wing, on Tonkin Hwy at about 6:30pm last night. Looked good :thumbsup:

thanks =] where were you??

spotted BOOSTD at his house lol i was walking around your area

Edited by R34P3R

Bayside blue R34 gtr with silver nismo decals down the side.. (had sau stickers in the windows)

I was in the little red peugeot gti at the side of you going into bunbury :)

Spotted this morning (all within 30 nins) a midnight blue R33 4 door on a trailer heading North on Great Northern hwy.

Maroon R33 Gts-T with ugly spoiler on West Swan Rd.

Purple R33 GTR with NSW plates on Gnangara Rd then straight after a white V35 on Ocean Reef Rd.

Maroon R33 coupe on a tow truck on the Leach hwy bout lunchtime. Looked clean!

Silver R33 coupe on Beaufort st and also a grey R33 Sedan as well. (I think I saw that yesterday, too many R33s!)

Also I see a black R34 coupe with what looks like D1R's (black with red lip) on the way to work everyday. Bayswater area.

Where are all the R32's hiding? :)

Edited by -Jimmy-

Maroon R33 coupe on a tow truck on the Leach hwy bout lunchtime. Looked clean!

Silver R33 coupe on Beaufort st and also a grey R33 Sedan as well. (I think I saw that yesterday, too many R33s!)

Also I see a black R34 coupe with what looks like D1R's (black with red lip) on the way to work everyday. Bayswater area.

Where are all the R32's hiding? :)

Spotted you on Guildford Rd from the passenger seat of Ross' R32 (golf!) on Sunday I think it was.

Saw a white R33 getting towed away with a Police car near by on Armadale road today around 7pm while I was heading back to Perth from Albany... got done under the hoon laws? :whistling:

white 34 v spec with L plates parked in the city today

Saw that gunmetal grey 32gtr it's got clear indicators and is for sale has skylineautralia sticker on the spoiler. Haha thought it was ten fours cuz I didn't get a good look at the plates.

R34 gtr v spec with L plates... Am I the only person who sees something wrong with that picture?

Also saw this r35 gtr outside the service area at northside in wangara.

853a15f8.jpg

Was wrapped in some sort of white can't think of the word had CF spoiler and front diffuser (cant remember what it's called ATM as well) plates were . . . 6688 or something like that. They made no sense.

Edited by MACR34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...