Jump to content
SAU Community

Recommended Posts

Have a read of this thread as it has lots of information on the fault codes.

The light that flashes is the one of the engine on your dash.

Cheers

Andy

Hey Andy,

Gave that a crack and just got 0000, so back to square one as to why the light is on.

On another note the torque split gauge just reads zero all the time?

Cheers.

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

My torque split gauge reads zero 90% of the time.

Lock the diffs by pushing the button to the upper right of the shifter. It should now show around 10 on the gauge, and you'll have a picture of your axles and a cog with S (?) in the middle lit up on your dash.

That's all working from memory. Give it a go and see.

Gauge still doesn't move, just sits there at zero. Even from a standing start and nailing it which you would think would activate the gauge doesn't. It does engage the front wheels as there is no loss of traction but I'm unsure if it's just running all the time or working as per norml. Also not sure if the gauge it's self is also faulty, will have to trace the wires back and see.

Gauge still doesn't move, just sits there at zero. Even from a standing start and nailing it which you would think would activate the gauge doesn't. It does engage the front wheels as there is no loss of traction but I'm unsure if it's just running all the time or working as per norml. Also not sure if the gauge it's self is also faulty, will have to trace the wires back and see.

Have you tried starting the car and putting it in drive straight away then stalling it? It should get rid of the 4WD light.....you may just have air in the lines.

Have you tried starting the car and putting it in drive straight away then stalling it? It should get rid of the 4WD light.....you may just have air in the lines.

I have not, do you mean stall the motor or stall it up as in foot on brake and gas? Sorry if that sounds stupid. Lol.

  • 2 weeks later...

my 4WD light just came on too.. tho next time i started the car it was gone.. seems to be all ok though.. my Torque Guage reads 0 all the time too unless i nail it in the wet then starts reading as it should.. (tho never tried when the 4WD light is on)..

This thread still being worked on?

BTW i took out my sat nav dvd out too.. though i reckon i had more wiring than you! had to take out the passenger seat to get to it all :)

my 4WD light just came on too.. tho next time i started the car it was gone.. seems to be all ok though.. my Torque Guage reads 0 all the time too unless i nail it in the wet then starts reading as it should.. (tho never tried when the 4WD light is on)..

This thread still being worked on?

BTW i took out my sat nav dvd out too.. though i reckon i had more wiring than you! had to take out the passenger seat to get to it all :)

It always makes me wonder what they were thinking when they do things like that... LOL

  • 2 weeks later...

I has 2WD... :ninja:

And it's raining... :whistling:

Finally think we've worked out that the issue with Mike's car is the ATTESA relay under the airbox (shut up Brad :P).

His relay is causing a 4WD fault light on my car, so that gives us a pretty good idea, but will know for sure when he sticks my relay in his car. :cheers:

I has 2WD... :ninja:

And it's raining... :whistling:

Finally think we've worked out that the issue with Mike's car is the ATTESA relay under the airbox (shut up Brad :P).

His relay is causing a 4WD fault light on my car, so that gives us a pretty good idea, but will know for sure when he sticks my relay in his car. :cheers:

WOOP WOOP!!! :banana: :banana: :banana: :banana: :banana:

Edited by impul535w

So was it the ETS realy in the end? And what does shut up Brad mean? :ninja:

So does this mean its an easy option for 2wd its still raining might have to pull the fuse and go for a spin

So was it the ETS realy in the end? And what does shut up Brad mean? :ninja:

So does this mean its an easy option for 2wd its still raining might have to pull the fuse and go for a spin

Im still skeptical about pulling the fuse, particularly after I saw the other Duncan write this

that gearbox/transfer case and mounting looks the same as r series. which means you are damaging your transfer case clutches running in RWD only. Plenty of people have done the "seems ok I'll drive like this for a while" thing.

the clutch packs have preload, and they will be slipping and wearing like bastards with the attessa pump off.

dropping the front driveshaft is fine though.

I won't be putting heaps of K's on, hoping that once Mike has worked it out, I'll get mine back this week.

Since mine is currently locked up at an alarm installers and can't come out to play, timing works out well :(

And Brad, I got your smug SMS, making us look at the front fuse and all :P

  • 1 month later...

I have the same intermittent issue of 4wd light.

anyone got pics of what the relay looks like

heres a reference to another 4wd light issue.

http://www.skylinesaustralia.com/forums/topic/294910-m35-stagea-4wd-light-on/page__p__5201550__hl__4wd+light__fromsearch__1#entry5201550

ok ...so today we checked ets relay and it working.... but it is not getting any signal as far as we can tell..... we put power through the relay and the pump fired up.... so it would seem the problem is upstream of the relay... any ideas would be greatly appreciated.. could it be a problem with the controller? or is there something more obvious??

ok ...so today we checked ets relay and it working.... but it is not getting any signal as far as we can tell..... we put power through the relay and the pump fired up.... so it would seem the problem is upstream of the relay... any ideas would be greatly appreciated.. could it be a problem with the controller? or is there something more obvious??

How did you put power through the relay? Did you power up the coil or just put 12v on the output of the relay to turn the motor on? You could of just got the wire that goes to the motor from it. You should have 12v on pin 3 when ign is on. And there will always be 12V on pin 1 the bigger wire. Did you here the relay click.

The negative of the coil comes from the EITS C/U. The relay is grounded when it needs to be through the control unit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...