Jump to content
SAU Community

Recommended Posts

Clutch life is not measured in months or years......but in how much abuse it gets.

sounds like the clutch is not disengaging when you push the peddle in . Chech the fluid reservoir first If you have fluid could be failed master or slave cylender. You can check the slave yourself, its on the drivers side of the gearbox at the front. Jack the side of the car up and have a look while someone works the clutch.... you should see the lever moving.

Link to comment
https://www.sau.com.au/forums/topic/36725-need-help-gearbox/#findComment-732911
Share on other sites

i know where to drain the gearbox but where do you fill it back up

More than likely your cluch is not disengaging from the flywheel. Try putting it into gear before starting the car and then start it see if it tries to bunny hop..

Be careful if you have any objects in front of you when you do this.

If the car hops and you have the cluch all the way down, then your clutch may need to be adjusted or as 51jay said the fluid may be low in the master cylinder.. Other reasons can be that there is air in the lines.. Have you changed the fluid lately? Just as brakes need bleeding so does the clutch.

Does the clutch feel diffrent to B4 this happened.. eg stiffer, loose?

A stiff clutch would indicate a problem with the presure plate or even the bearing and lever (pivot point may be worn, broken)

A loose feel would more than likely be air in the lines.

Sometimes a simple adjustment can solve the problem.

Link to comment
https://www.sau.com.au/forums/topic/36725-need-help-gearbox/#findComment-733552
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...