Jump to content
SAU Community

Recommended Posts

the isc one is. even keeps the standard fan and fan shroud. never had a problem with it and i've been rocking it for 3 yrs now

-D

Also had one in my R32 GTR and now my S14 and its a direct fit + lower temps (especially at the track), no problems at all. Only thing you may need to do is re-tap the temp sendor hole as its made for an aftermarket sensor.

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5859354
Share on other sites

Also had one in my R32 GTR and now my S14 and its a direct fit + lower temps (especially at the track), no problems at all. Only thing you may need to do is re-tap the temp sendor hole as its made for an aftermarket sensor.

ask me bout my alloy rad... go on...

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5860437
Share on other sites

Also had one in my R32 GTR and now my S14 and its a direct fit + lower temps (especially at the track), no problems at all. Only thing you may need to do is re-tap the temp sendor hole as its made for an aftermarket sensor.

+1 for the ISC Rad,

Had one for a few years myself now after my stockie died and very happy with it.

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5862346
Share on other sites

was this the one that went into the S14 though or an R32? Never had any issues with an R32 rad fitting into an R32 before etc. We havn't fitted one into an S14 before so I can't comment on that fitment (we have fit them into S13/180sx and A31 though). The cap supplied with the radiator should fit up 100%, if there was an issue then I could have been contacted to help etc.

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5862766
Share on other sites

was in the s14.. the cap that came with it was fine. but the height of the neck on the rad was different from an OEM rad.. i only picked this up recently as the problem and cause of all my overheating issues... this was after i pulled my head off and replaced HG and all that.. so was slightly annoying to find something so small and simple such as a design fault in the rad to be the problem.

Edited by Simon-S14
Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5862857
Share on other sites

Why do you class it as a design fault though? Like I said the r32 rads work 100% fine when installed into an r32 etc. Yes they may need very slight modification to fit an a31 as it is an r32 rad but the mods would be very minor. Not trying to start any arguments here guys, the feedback is appreciated.

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5863554
Share on other sites

its a design fault if it doesnt seal the radiator cap properly isnt it. im not saying all of them are like that as you've got plenty people who run them with no issues but this particular one did have issues. I ended up throwing it out as scrap alloy... put a stock radiator in and all problems gone. also tested on another R32 and some problems were there with rad.

it also held pressure in the system. after a week of not driving you'd pop the cap off to check coolant and there would be pressure trapped in there. this was same on other car tested also. this is not normal and shows that its not allowing the cap to open its drain back valve as coolant cools down

Link to comment
https://www.sau.com.au/forums/topic/367288-alloy-radiator/#findComment-5863593
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...