Jump to content
SAU Community

Recommended Posts

Hi guys and gals.

Here's the back story, Had my skyline yellowed and didn't have the time to get it off till recently (been bout a year).

The whole time the car was off the road i started it every other week to let it tick over (plus i love the sound)

Finally got it squared away and it passed the pits first time yay.

But just recently cylinder 5 has been cutting out WTF?

I narrowed it down to cylinder 5 by pulling out the plugs for each coilpack until the missing sound didn't change. I originally thought coilpack so

I changed pack 4 and 5 around but cylinder 5 still dropped out but 4 was fine. so i changed around the plugs same again. Sprayed all plugs, coils

and connections with contact cleaner still nothing.This is really giving me the shits as it happens on and off so im thinking either ECU or harness.

If anyone has had this happen to them, has an ideaor has a coilpack harness I can borrow to strike that from the list I'd love to hear from you.

Cheers people

Gavin

Link to comment
https://www.sau.com.au/forums/topic/367444-help/
Share on other sites

series1 or 1.5/2???

if series 1 try getting a hold of ignitor pack to try as well cause my 32r was dropping cylinders 6 & 4

and did the same thing changed plugs coil packs even did other things then chucked on a different ignitor a pow all fixed

Link to comment
https://www.sau.com.au/forums/topic/367444-help/#findComment-5861774
Share on other sites

At this point in time I think i need all of you to form a line and kick my ass :spank: .

I finally got round to checking the ecu with the help of a mate and it turns out the harness plug wasn't

all thje way in on all sides even though it was bolted in. It must have been done when the inspector at the pits had the kick panel off

having a look to make sure the ecu was standard I'm guessing, as i didn't have this problem

till I got backfrom the pits. So far the car hasn't missed a beat so fingers crossed that was the problem

and not something else.

Thanks to everyone for your help Ifeel like such a dumbass :blush: .

Cheers

Edited by Gabbo2047
Link to comment
https://www.sau.com.au/forums/topic/367444-help/#findComment-5862347
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...