Jump to content
SAU Community

Recommended Posts

i found this info on the forum- as i am looking at turbos aswell

HKS GT2835 technically they are a GT3071R 56T in cropped turbine form.

Using the current Garrett terminology means its easier to compare turbos because their formula tells you the turbine family ie GT30 followed by the compressors major or outside diameter in mm . If you apply this then you can see that a "GT2871R 56T" and a "GT3071R 56T" use the same identical compressor wheel .

The turbine side is quite different the GT28 series turbo having a 53.8mm 9 blade 76 trim wheel and the GT3071R in cropped form has a GT30 10 bladed wheel at ~ 56.6mm and 84 trim . The HKS GT2871R 56T uses a custom GT28 turbine housing with the T3 flange cast into it and in 0.64 A/R . The HKS GT3071R Pro S uses a custom GT30 turbine housing in 0.68 or 0.87 A/R ratio , it also needs their unique dump pipe to suit their custom housing

Courtesy of discopotato03, not my info

It's very hard to tell you what it is without knowing the part number.

If you could look at the tag and try and find a number that would resembles '700177-0010' we could then tell you what turbo it is.

It is likely to be the HKS cropped version of the 3071 as mentioned above, however it could be a number of variants which would change its suitable application.. Some were made for single use, others were made for twin kits like on GTR's.

Please post the part number that is similar to what I have posted above.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...