Jump to content
SAU Community

Recommended Posts

drift_skills_flyer_2011_final.jpg

Victorian Drift Club - DRIFT SKILLS

~ Saturday 9th of July 2011 ~

This is an OPEN event for all (VDC membership not required)

Format:

- Beginners day at the DECA Skidpan

- 3 classes of 15 students

- Rotate through drifting basics such as controlled donut, controlled figure 8 and handbrake maneuvers

- Class runs from 9-5, with 1hr catered lunch provided

- 2 instructors per group

- Drivers must arrive by 8AM to begin registration, scrutineering and drivers briefing

Location

DECA Skidpan

145 Wanganui Rd

Shepparaton

Victoria

This event is NOT open for spectators, strictly drivers and pit crew only. Vehicles cannot carry any passengers with the exception of the Instructors

Driver Prices: $229 (covers entry fee and lunch)

ENTRIES NOW OPEN

Please go to following link to register online : http://vicdrift.com/site/index.php?option=com_dtregister

PRE-ENTRY and PRE-PAY is COMPULSORY AT ALL VICDRIFT EVENTS. ENTRIES CAPPED AT 45 drivers

CANCELLATIONS : We require notice via EMAIL to [email protected] by 8AM of the Thursday prior to the event, or you will forfeit your entry fee. For this event we require notice by 8AM 7th of July. We have been running this system since 2010, no excuses. If you miss the cut off you will not be given a refund.

Acceptable Licenses are: AASA or Cams L2NS - No license means no going on the track!

On the day purchase of AASA license:

AASA license $50

(Can be purchased at driver registration on the morning of the drift day. This needs to be done before you come into the scrutineering bay to register and have your car scrutineered as entries will not be accepted without proof of license or receipt of payment)

Please note : VDC board members will be checking aasa and cams licenses, this year we will be checking everyone. Please ensure all your licenses and memberships are valid.

The usual requirements as always are:

*Long sleeve and long pants of non flammable materials i.e. No Nylon

*Closed footwear

*Helmet that complies to Australian Standards (has ASA or Snell Sticker)

*Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure. It must pass scrutineering to be allowed on the track!

*Working seat belt/s (give it a pull and make sure it locks)

* Every car must have the correct amount of wheel nuts:wheel studs. Get it right before you get to the track!

* All cars must run some form of muffler/resonator/catalytic converter on their car. You only have to run one of the mentioned forms of a spark arrester.

* All forms of wastegates on turbocharged vehicles are ALLOWED

* All cars must ensure their exhaust exits past the perimeter of the car, "dropped pipes" are NOT ALLOWED

Basic Scrutineering Guide can be found here:

http://www.vicdrift.com/forums/index.php?showtopic=674

* FIRE EXTINGUISHERS ARE COMPULSORY AND MUST BE FITTED CORRECTLY IN THE CAR AND WITHIN EASY REACH OF THE DRIVER!

Can't make this one, see below for the rest of 2011 events:

http://www.vicdrift.com/forums/index.php?showtopic=1104

Link to comment
https://www.sau.com.au/forums/topic/367542-drift-skillz-learn-to-drift/
Share on other sites

  • 2 weeks later...

would be keen for this IF my car was capable of sliding

You have an R32 GTS as in your profile? You can slide that no problem. ;)

My track car is an R31 and that tears it up! I also have an R32 GTS-25 that drifts no problem.

Get out there and try it!

5846642019_c4a94c3b31_b.jpg

No, you really have to drive Alex's car...it's incapable of sliding lol. Even the handbrake fails!!!

nah its completely capable now birds, put coilys in and hicas lock bar, the only thing that i need to slide is to weld my diff, which will be done very soon :thumbsup:

handbrake is nice and tightened up too!

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
    • Murphy strikes again! Nothing at all would have gone wrong if you had the tool kit in the car! You'd have just found the clamp loose the next time you went to touch it...
    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
×
×
  • Create New...