Jump to content
SAU Community

996 Porsche Cup Car Brembos

Daz
 Share

Recommended Posts

Daz Grand Master

Daz

Posted
Posted

post-3332-0-69250600-1308368684_thumb.jpgpost-3332-0-69250600-1308368684_thumb.jpgFor sale is a brand new set of Porsche 996 Cup Car Brembo 6 spot calipers and Brembo 355mm x 35mm rotors.

I will also throw in new pads.

The calipers are brand new and have ceramic pistons, these are massive calipers and will need a minimum 18" wheel

Brembo rotors are about 25-30% worn.

All you need to do is get custom hats and brackets made up.

Price $2,600 ono

Would prefer a Melb buyer

Thanks

Darren

post-3332-0-38647200-1308368694_thumb.jpg

post-3332-0-92069000-1308368753_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/368151-996-porsche-cup-car-brembos/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
luke gtr Grand Master

luke gtr

Posted
Posted

Are these the ones that are backwards or something?

by the look of it, they are set up to run towards the rear of the wheel, rather than in front as per the standard skyline caliper.

the larger piston should be in the dirrection the rotor rotates(rotor going clockwise, should be last piston past by the rotor).

so if mounted as currently set up, the piston will be on the wrong end.

you should be able to swap the bleed nipples, and transfer pipe(possibly have to get one made up), and youll be fine. :thumbsup:

personally, if i had the cash, id snap these up, hot looking calipers, with pads and rotors...

just saving the dollars as we type.

good luck with sale, will be an awesome addition to someones car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...