Jump to content
SAU Community

Recommended Posts

Hey guys I got my 100k service done with the kudos kit. I got it done at a well known mechanic in the Wollongong area.

I lowered my idle revs the other day with the plastic screw (r34 gtt). The air flow one I think it is?

It was sitting on around 1100-1200 as that's how I got it.

I lowered it to the reccomennded 650 and since then I can hear a sorting of rubbing sound every now and then like it the timing belt?

Does this sound likely? Should I raise my revs? Take it back to the mechanic? Or is the belt just wearing in??

Hey guys I got my 100k service done with the kudos kit. I got it done at a well known mechanic in the Wollongong area.

I lowered my idle revs the other day with the plastic screw (r34 gtt). The air flow one I think it is?

It was sitting on around 1100-1200 as that's how I got it.

I lowered it to the reccomennded 650 and since then I can hear a sorting of rubbing sound every now and then like it the timing belt?

Does this sound likely? Should I raise my revs? Take it back to the mechanic? Or is the belt just wearing in??

I've had a couple of 100000 services done and no belt noise.They could of put it on too tight take it back and get them to check,better to be safe than sorry. :D

could me lowering the idle revs done anything??hmm i could be making myself think this but there may be a dip in power.oh really? hmm i like the first comment better then the second haha. i might give him a call.

no not at all.it sounds like a rubbing, you can only hear it on idle.its not a squeak its a rub and it does it over and over while idleing, as if when something turns around its hitting something. if that makes sense. i could probly do a youtube video if need be.

Ive adjusted my timing belt(gates belt) 3 times my self. First time it made a scrubbing kind of sound it was loud. Definitely too tight. Now its just down to a tame whirr which is normal if you are using a gates belt. A gates belt has almost no stretch and no room for tolerance. If you are running the belt too tight it will make noise right throughout the rev range as there is constant strain. Its a pain in the arse loosening it, pretty much everything off again just to get to the damn tensioner.

First time took me about 3 hours, second time to adjust took about 30 mins to pull everything off. I reckon I can do a full timing belt change on an R33 in about 1 hour now.

This is mine:

Most horrible sound my car has ever made. Its gone now and as I said just a faint whirr.

Edited by SargeRX8

simple solution, piss off the gates and get a genuine nissan belt! I had so many dramas with my previous skyline and the gates timing belt. All the mechanics I took it to said that it was normal and to let it 'wear in' and the noise would disappear. 8000km's later and it was still making that humming noise.

I have one of these belts on my own car as well, there are two different gates belts as far as i am aware, the one i have is the "race" version and is blue, it makes a light whirring noise, although your seems louder, or it could just be that my car runs a solid top end and jun cams which are quite loud and it may not be as noticeable.

provided the tension of the belt is ok, i cant see there being a problem, apparently very strong belts, hence the noise, but i wouldn't buy another one, the nismo seems to have the best rap, or genuine

100% belt noise, its definately tighter than it should be. Ill get a video tomorrow of how mine sounds. Its not loud(sometimes when warm it CAN get a little audible) but definately not that noticeable. It is if you stick your head under the bonnet.

And why the hell would you remove it? Adjust the tension, thats it. They are great belts, better than Nissans. Nissan belt is softer so it stretches a tiny bit to give the belt a tiny bit of play room. Get this tensioned right and she will be fine. Its not going to break, its not gonna snap, its not going to kill your engine if its fitted right. Noise is noise, its normal.

Get it adjusted and after a while you wont even notice the tiny whirr. Its inaudible from the cabin.

100% belt noise, its definately tighter than it should be. Ill get a video tomorrow of how mine sounds. Its not loud(sometimes when warm it CAN get a little audible) but definately not that noticeable. It is if you stick your head under the bonnet.

And why the hell would you remove it? Adjust the tension, thats it. They are great belts, better than Nissans. Nissan belt is softer so it stretches a tiny bit to give the belt a tiny bit of play room. Get this tensioned right and she will be fine. Its not going to break, its not gonna snap, its not going to kill your engine if its fitted right. Noise is noise, its normal.

Get it adjusted and after a while you wont even notice the tiny whirr. Its inaudible from the cabin.

+1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...