Jump to content
SAU Community

Recommended Posts

have u got the o2 sensor for series2 stagea rb25 neo?

Hi,

Just use our 3-wire universal oxygen sensor kit. All our RB25 NEO guys use them - work a treat!

$60 Incl. delivery.

- Brendan

  • 2 weeks later...

Hey mate, i've got an r34 GT with an RB26dett with HKS dump pipes.

Do you sell o2 sensors to suit?

I don't have the original plugs either, so might need to sort something out there.

Rough cost estimate with postaged to WA?

Hey mate, i've got an r34 GT with an RB26dett with HKS dump pipes.

Do you sell o2 sensors to suit?

I don't have the original plugs either, so might need to sort something out there.

Rough cost estimate with postaged to WA?

Hey mate,

You can use our universal 3-wire oxygen sensor kit however you would need to get hold of an original R34 plug. All our NEO customers use this kit and it works great.

Cost would be $65 incl. delivery to WA.

Cheers,

Brendan

(VM)

Is this for an rb26 or would i need to by a second sensor as well... could i use any 3 pin plug as long as i buy a male and female connector?

... I've had a customer recently use our RB25DET oxygen sensor and just swap the connector's, I can't say which one he replaced though.

Do you have part numbers for the 2x sensors?

Is pickup available?

And do you have R33 GTR sensors in stock?

Sure thing - give me a call on 0401599023 to organise pick-up from the Moorabbin showroom!

This sensors has been used on the GTR's, just need to use the original plug.

- Brendan

Whats the difference between these and OEM? Do you sell OEM as well, have them in stock?

Hey,

These are aftermarket manufacturers to same spec's as the original ones, we cannot source original ones from Nissan at this point in time.

- Brendan

Hey..

are these $59 or $69?

How much for 93 R33 GTST sensor delivered to 4509?

Hi,

These are $69 incl. delivery to 4059.

- Brendan

  • 3 months later...

Hey mate, just want to make sure before I place a order. Do you have a direct plug-in type for a 96 r33 gtst series 2, rb25det? How much included shipping to Sydney 2200? And how do I place a order and pay? Cheers!




  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...