Jump to content
SAU Community

Recommended Posts

all exterior parts(white immaculate condition)

18" rims with tyres 235 front 265 rear

motec m800

rb25det with forged pistons and rods, cams, cam gears, stainless top end, strengthened crank (less than 30,000kms since rebuild)

5sp manual gearbox

lsd rear diff

nissan 4 pot front and 2pot rear brakes (EBC green stuff pads, dba 4000 rotors less than 2000kms old)

rear axle shafts

lightened and balanced tailshaft

garrett gt35r turbo

k&n filter

2x front facing plenum

80mm throttle body

stock throttle body

2x top mount exhaust manifolds

48mm turbosmart progate wastegate

turbosmart veeport bov

hks ssqv bov

300kph nismo cluster

880cc denso injectors

bosch high volume fuel pump

high flow custom injector rail

splitfire coils

polished rocker covers with breathers & catch can

turbo back 3" exhaust

bilstein shocks

king spring SL springs

all whtieline bushes

radiator

power steering pump

a/c compressor

a/c condenser

alternator

m spec spoiler

vented bonnet

2x short shifters

tail lights

nismo side indicators

all interior parts

black gear/handbrake boot with white stitching

all original windows

2x defi bf boost and oil temp with sensors

greddy pillar dual gauge pod

AND MUCH MORE JUST MESSAGE ME FOR ANY PARTS/BOLTS ALL PARTS ON VEHICLE ARE AVAILABLE

0401439396

vehicle made 480rwhp and was all in good condition when removed

post-67337-0-26688300-1309085158_thumb.jpg

post-67337-0-28721100-1309085216_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/369074-wrecking-r33/
Share on other sites

Hey man I'm interested in your center console and gear surround (including gear and handbrake boots).

how much? What's your location? Will u post to Somerville 3912?

Link to comment
https://www.sau.com.au/forums/topic/369074-wrecking-r33/#findComment-5884155
Share on other sites

  • 5 weeks later...

Hey can you pm me details of:

Dump, front and cat pipes, the size, if it's stainless, and if it's high flow cat.

Hks Ssqv, how old it is, what's involved in fitting it to a gtt

KN filter is it pod?? How old is it? What material is it??

18 inch wheels, pics?

Can you also include price on all of them??

Link to comment
https://www.sau.com.au/forums/topic/369074-wrecking-r33/#findComment-5957815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...