Jump to content
SAU Community

Recommended Posts

My poor ceffy has copped a smack in the rear end so i am parting it out. Let me know what you need and i will do my best to make sure you get a good deal.

Some cool things include autech front bar and sideskirts, genuine cefiro key, locks and ignition barrel, all pannels, glass, doors, seats etc. Just let me know what you need and i'll tell you if i have it. And even better if you want the whole thing. I also have lots of spares laying around. let me know if you would like to me to send you photos.

*will update this post soon*

Chris - 0414389834

IMG_20110629_131515.jpg

IMG_20110629_131546.jpg

IMG_20110629_173803.jpg

IMG_20110629_174050.jpg

Edited by filo_a31
Link to comment
https://www.sau.com.au/forums/topic/369693-wrecking-blue-a31-cefiro-sydney/
Share on other sites

price on whole dash loom all the way to headlights with fuse boxes ect posted to melb?

To be honest you don't want want my dash loom, it looks like it has be rewired a few times, and yea, not the best haha

have you got a quote on repair? looks it needs a pull and rear bits

Picked up a rolling shell for cheap.

Damage seems to be, bent lower control arm, punctured fuel tank, bent reo, smashed taillights, smashed rear bar, quarters are rippled and there's a buckle in the roof at the top of the C pillar.

Picked up a rolling shell for cheap.

Damage seems to be, bent lower control arm, punctured fuel tank, bent reo, smashed taillights, smashed rear bar, quarters are rippled and there's a buckle in the roof at the top of the C pillar.

what's the condition of the passenger side door? paint wise?

cheers

what's the condition of the passenger side door? paint wise?

cheers

Passenger side door is in good nick, i'll double check it when i get home and get back to you.

empty front cut?? with headlights indicators and guards??

I need the headlights and indicators for my other shell. I can do you a brare front cut with just the guards. The passenger guard is slightly dinged but nothing serious, i can take photos if you like?

pics if you must , postage?? , i only need the guards and rad support and rh side to the firewall (and bar rio) . your ceff looks familiar :ph34r:

I'll take pics for you tomorrow and pm you with the price. I also have a bonnet it your interested. I stupidly threw out the front rio thinking no one would want it haha, but it was all chopped up for the front mount. No sure about postage but if you can organise freight to come to my house in engadine, nsw. That might make it easier.

I'll take pics for you tomorrow and pm you with the price. I also have a bonnet it your interested. I stupidly threw out the front rio thinking no one would want it haha, but it was all chopped up for the front mount. No sure about postage but if you can organise freight to come to my house in engadine, nsw. That might make it easier.

Drivers window reg sold, passenger rear door lock mechanism sold, passenger seat sold, body kit sold.

STILL HAVE HEAPS OF STUFF THAT NEEDS TO GO WITHIN THE NEXT 2 WEEKS OR IT GOES TO THE SCRAP YARD!!!!

HAVE ALL BODY PANELS, DOOR TRIMS, STEERING RACK, DASH, HICAS LOCK BAR, STANDARD SUSPENSION ARMS AND HEAPS MORE!!!

YOU WILL NOT FIND CHEAPER PRICES AND IF YOU DO I WILL DO BETTER!!!

also have a stright through pipe from the cat to the rear muffler, frosted passenger headlight, rb20det motor and loom with no injectors or turbo (unless i can find my standard injectors that i can't seem to find). May also sell my 21 safety 6 point roll cage (non sunroof) if i cant get it to fit in my new shell that has a sunroof.

  • 3 weeks later...

Shell has been scrapped. Still have doors, with trims and glass, bonnet, rb20 with wiring harness, interior trims etc.

I also have a spare passenger side headlight, steering rack and hicas lock bar

Edited by filo_a31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...