Jump to content
SAU Community

Recommended Posts

hey guys,

i spent hours on getting these back to raw alloy with paint stripper & a tooth brush - i was planning on painting them satin as per factory finish...its almost a shame to paint them considering the time & effort i spent on this. although i need honest opinions, leave them as is raw alloy OR paint them so that they dont stand out as much?

post-8728-0-97604400-1309673766_thumb.jpg

post-8728-0-35012500-1309673774_thumb.jpg

post-8728-0-65399500-1309673780_thumb.jpg

post-8728-0-62972700-1309673788_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/369811-windscreen-wiper-arms-need-opinions/
Share on other sites

Man lol that looks like alot of work.

I would like to see them black or a very dark matching colour to your white

Wipers are a very... unimpressive thing on a car - and yours currently stand out A LOT. So you are making something unimportant stand out more than the 'important' features. If that makes any sense haha...

Regardless of the look.

1. It will rust at parts (mine did)

2. Wait for the right time of day and you'll get a blinding glare.

Both the above are currently a problem for me as small sections have either begun to rust or are reflective just like a mirror.

Wouldnt mind tips on how to clean it up and re paint. :)

Regardless of the look.

1. It will rust at parts (mine did)

2. Wait for the right time of day and you'll get a blinding glare.

Both the above are currently a problem for me as small sections have either begun to rust or are reflective just like a mirror.

Wouldnt mind tips on how to clean it up and re paint. :)

if you dont want it to rust just throw some clearcoat on it..but true you could get a glare at times..

As for repainting i just gave mine a quik rub with a fine wet n dry then sprayed them with satin black high temp (heatproof) paint..look good as new and was piss easy and heatproof paint should withstand the sun for years

Marko they actually look pretty cool cause you have done such a good job..wether or not you should keep them is up to you but they dont look too bad..

I'd paint them with clear undercoat (to prevent any rusting or surface corrosion) and leave them for a while then if you change your mind just spray black on them..

too easy :thumbsup:

alloy will corrode...

you didnt actually need to strip them completely to repaint them though...

I just did mine, a clean a sand a black satin paint... done...

That's what I thought tooo.. lol

I have 2 sets of wipers, the 1st set I did sand back then paint but wasn't happy with the finish which is shy I stripped these back...I'm ultra fussy and the smallest defect drives me nuts! I will paint them satin black though once again...a lot of thr older cars and american muscle have silver wipers and mine is not an american muscle car haha

How come you used paint stripper instead of sanding it? Also, if you leave it as "raw alloy", wouldn't it rust?

something as fiddly as wipers are sometimes easier to paint strip than sand,

especially if you want to take them back to bare metal.

That is right guys, if u want a 100% job with no defects, u need to paint strip them! I had to apply about 6 coats as its hard to get to the paint in hard to reach spots like the underside where spring is mounted.

I'll paint them tomorrow and post some pics :)

The wipers did take a bit of time to wrap before it's small, thin and fiddly lol.

But the vinyl has a self-adhesive backing, so you supply it and with a heat gun to stretch, fold around corners :)

Here's a whole thread about the vinyl and wrapping - http://www.skylinesaustralia.com/forums/topic/296681-carbon-fibre-vinyl-wrap/

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...