Jump to content
SAU Community

Installed R33 Turbo And Now I Have Hesitation Under Acceleration, Idle Issues And Loud Turbo Whistle


Recommended Posts

Hello

I recently installed an r33 turbo in a stock r32 gts4 and i drove it for a few days and it was fine, it obviously needed a tune. All of a sudden on the drive home tonight the car has severe hesitation when i open the throttle (like the car is stalling, rocking back and forth) and the idle is high at 1500 and sometimes moves from 1000 to 1500 continuously.

On top of that the whistling of the turbo has gotten louder.

I had a look over the vacuum lines but apart form that I really dont know where to look for the problem as it ran fine yesterday (I haven't driven it hard because I'm waiting to get it tuned properly). Has anyone had any of these issues?

You wont be able to tune it until you sort out the leak/issue. Its a decent leak, check all the larger hoses on the plenum, as the idle is high its after the throttle.

yeah, i've got the same issue.

the car runs fine but i do hear a slight whistle when on boost after some very heavy throttle. but the car stil goes fine.

i'm pushing some pretty decent boost though. 24psi

thanks for the replys!

I found an intercooler clamp that seems to get loose after a few kms of driving, that has been replaced. Also changed some worn vaccum lines.

Still after a few kms of driving there is some hesitation that goes away momentarily after turning the car off and on again.

I'm checking the turbo to manifold bolts as we speak and will post what happens

thanks!

yeah, i've recently had the intercooler changed as well as the clamps. and its only after this that the whistle appeared.

its more than likely a clamp that is leaking a slight amount when under pressure.

i'm probably due to change the vac lines though. the car is 20+ years old and the hoses would more than likely be the same ones that came on the car brand new.

when i had my idle control valve blocked off the car boosted higher. so leads me to believe that the lines are pretty old and maybe some new ones might help hold boost to redline

Your right Brezza, it might be that a few of the cooler hoses and vacuum lines i have are just too old, i replaced all of the original ones when i swapped the turbo.

I double checked all of the vaccum hoses i could see and replaced all of the 4mm and 6mm hoses i could see (Didnt have any replacement hoses for the big ones so not changed yet) - still whistling

I tighten the bolts but only millimeters as its already fully loaded (I hope they dont break) - Still the same whistle

But then I realised the the r33 turbo does not fit on the stock intake rubber pipe of the r32 and is quite loose, I tightened the rubber hose with the clamp but it may still have some leaks. So i got a bit of intercooler 2.25" hose and put it over the turbo intake and then put the r32 intake hose over it, it was a tight fit. I then clamped it tight and took the car for a drive.

I noticed there is less whistling at lower rpms and it comes on at a higher boost than before, maybe a 1000 rpm higher but not as loud. There must be boost leaks somewhere so i just have to find it. At this rate though i would be replacing every rubber hose in the car lol

Maybe I need an r33 intake hose but putting it in the r32 means I cant have the stock airbox position as its longer...

A good thing is a havent seen any hesitation on my test drives sop lets hope it stays that way

Edited by RIPae86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...