Jump to content
SAU Community

Recommended Posts

Definitely need to know what turbo youve got before you can select a housing. You may find replacing the housing will fall short in benefit to replacing the whole turbo.

Can you please state what your aim of changing the housing is so we can comment on a better solution if possible?

Also, not knowing your turbos actual spec gives me the impression it may be a cheaply made thing and you could be blowing hard earned dollars in the wrong way. There are many options around the $1k mark these days that will easily replace what you have and possibly exceed your aims for the change.. Chances are buying a garrett housing OR moddifying another one to suit your 'hybrid' turbo will cost similar money and wont necessarily hold the gains you seek.

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900241
Share on other sites

And inducer/exducer refer to the smallest and largest diameters of the wheel in question respectively. Irrespective of compressor or turbine.

Just to clarify.

you sure bout that? isnt the inducer the diameter that draws the air/gas in and exducer the diameter that expels the air/gas?? so the 60mm being talked about is the turbine inducer diameter isnt it??

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900264
Share on other sites

Nag its not a cheap setup the previous owner spent 3500 on getting the turbo custom made buy a bloke here reason I'm changing is cause it was on an Sr20 and its now going on a 26/30 so going a bigger rear and also I have a twin scroll manifold so need a housing to suit that forgot to get turbo today so I will get it tomorrow and take some measurements

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900558
Share on other sites

you sure bout that? isnt the inducer the diameter that draws the air/gas in and exducer the diameter that expels the air/gas?? so the 60mm being talked about is the turbine inducer diameter isnt it??

Yea thats how I have an understanding of it

Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5900563
Share on other sites

so took a better measurement before didnt have the right tool before was just going bye eye n a ruler lol

turns out i have a 66mm inducer and a 56mm exducer cant seem to find any info on the as to what rear housing to buy anyone got any ideas?

been having a look around and the garret t31 housing i have on there atm soom to suit gt30/gt35 and its definetly a bigger than 60mm wheel (gt30) so im guessing it has to be a housing to suit gt35?

Edited by t04z
Link to comment
https://www.sau.com.au/forums/topic/370081-rear-housing/#findComment-5905830
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What's on the front of their building?
    • Jax Tyres Smithfeild Ive gone there a few time, well for tyres. on my 3rd visit I spoke to the dude and told how i just got slugged for rotors, brakes ect. His reply was golden; have you read whats on the front of the building. Never forgot it.       before picture, good friend got all these goodies installed.  Well time to study, servicing, maintenance all before this weekend driving lesson.  
    • Hello, first of, I’ve looked at many threads on this code but none have helped me, if you know one that will help me feel free to post a link.   Now to my problem. Recently I was driving and noticed the check engine light came on. I went home and did the test to see what code it gave. I got the 21 code but everything seems fine with the car, no misfire, idle is good, acceleration is the same as when I bought it. I mean no signs of obvious failure. If no misfire is happening I can rule out the coil packs right? Which is about 98% of posts saying it is. If anyone has had this happen and found the issues let me know please. No other lights are on.   The car WAS due for an oil change. I since then changed it so idk if that triggers code 21. Either way it hasn’t turned off.
    • Your both right, it may hold a bit longer then.  Soon I need to change the synchros, should I fit the billet plate while I'm at it? Or just a waste of money?
    • Some of the east coast US Stagea got together this past weekend at Lime Rock Park in CT for Grid Life Circuit Legends. This is probably my favorite pic of the shoot with @Morgan.Mundahl on IG. Hope we get more stags out next year! i think I spotted 5 other than my own at the event. 
×
×
  • Create New...