Jump to content
SAU Community

Recommended Posts

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm

This is pretty much same specs as the Mines titanium down pipe and will fit GT-R 32, 33 & 34

Brand new item which I bought earlier this year but have since had a custom pipe made to suit my exhaust.

Therefore I dont have a need for this and would like to send it to a good home.

These are a piece of art and weigh in at 1.9kg's

Price is $1350 FIRM delivered .

ENDLESS CC-RG BRAKE PAD SET (Front & Rear)

This is brand new set of front and rear pads unused for GT-R33 & 34 and GT-R32 V-spec

I bought 2 sets of these in Japan last year.

One set are on my car and definitely dont need another set so these are sitting around gathering dust.

These are awesome pads for street and track.

Price is $520 for the Front & Rear set package delivered.

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

Bought these on the possibility that I was going to have run Power FC on my car

Have sorted out tuning for my F-con for the time being so not needed anymore.

These have been checked by mechanic at HKS and all in workng order.

Used but in good condition.

$1050 Delivered

APEXI POWER INTAKE KIT FOR GT-R 33 & 34

These are brand new unused and in original box.

Bought these same reason as above and would need Power FC and air filters.

$310 Delivered

Pics...

MIDORI FRONT PIPE

JF0S7259.jpg

JF0S7260.jpg

JF0S7261.jpg

JF0S7262.jpg

JF0S7263.jpg

ENDLESS CC_RG'S

JF0S8029.jpg

JF0S8035.jpg

APEXI POWER FC , COMMANDER & BOOST CONTROLLER

JF0S8013.jpg

JF0S8014.jpg

JF0S8016.jpg

JF0S8018.jpg

JF0S8028.jpg

mamma31-img600x337-1303952793iby8nf53708.jpg

I'll get some pics of the Apexi Power Intake Kit soon but they look like this

apexipodgtr2.jpg

Yeah Deano they are awseome pipes and ridiculously light.

Photo's do not do the justice.

Sad to see em go but have custom titanium pipe going on..

:ph34r:

would these be noticeably louder than stainless? different note?

I've heard them on cars at Midori and bloody awesome.. very similar to the Mines front pipe.

soooo.. that would be a yes for louder or just diff note? :D i have the Midori stainless front pipes, and Midori titanium catback but i'm wondering if it will just put it into silly noise territory if full Titan.... hmmm...

Will sound porn ...

I'll be seeing them in a couple of weeks so will try record one of their cars but most of em have full system

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

$1000 Delivered anywhere in Oz.

All pm's answered

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (On HOLD)

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (SOLD)

  • 2 weeks later...

ENDLESS CC-RG BRAKE PAD SET (Front & Rear) now $500 delivered anywhere in Oz

Absolutely awesome pad !!

Good price especially with current value of yen to the Aussie dollar.

Will cost you a good $60-$70 more now to buy off nengun etc.

These are in my opinion without doubt best Street/Track pad around.

Full set of front and rear pads !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...