Jump to content
SAU Community

Recommended Posts

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm

This is pretty much same specs as the Mines titanium down pipe and will fit GT-R 32, 33 & 34

Brand new item which I bought earlier this year but have since had a custom pipe made to suit my exhaust.

Therefore I dont have a need for this and would like to send it to a good home.

These are a piece of art and weigh in at 1.9kg's

Price is $1350 FIRM delivered .

ENDLESS CC-RG BRAKE PAD SET (Front & Rear)

This is brand new set of front and rear pads unused for GT-R33 & 34 and GT-R32 V-spec

I bought 2 sets of these in Japan last year.

One set are on my car and definitely dont need another set so these are sitting around gathering dust.

These are awesome pads for street and track.

Price is $520 for the Front & Rear set package delivered.

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

Bought these on the possibility that I was going to have run Power FC on my car

Have sorted out tuning for my F-con for the time being so not needed anymore.

These have been checked by mechanic at HKS and all in workng order.

Used but in good condition.

$1050 Delivered

APEXI POWER INTAKE KIT FOR GT-R 33 & 34

These are brand new unused and in original box.

Bought these same reason as above and would need Power FC and air filters.

$310 Delivered

Pics...

MIDORI FRONT PIPE

JF0S7259.jpg

JF0S7260.jpg

JF0S7261.jpg

JF0S7262.jpg

JF0S7263.jpg

ENDLESS CC_RG'S

JF0S8029.jpg

JF0S8035.jpg

APEXI POWER FC , COMMANDER & BOOST CONTROLLER

JF0S8013.jpg

JF0S8014.jpg

JF0S8016.jpg

JF0S8018.jpg

JF0S8028.jpg

mamma31-img600x337-1303952793iby8nf53708.jpg

I'll get some pics of the Apexi Power Intake Kit soon but they look like this

apexipodgtr2.jpg

Yeah Deano they are awseome pipes and ridiculously light.

Photo's do not do the justice.

Sad to see em go but have custom titanium pipe going on..

:ph34r:

would these be noticeably louder than stainless? different note?

I've heard them on cars at Midori and bloody awesome.. very similar to the Mines front pipe.

soooo.. that would be a yes for louder or just diff note? :D i have the Midori stainless front pipes, and Midori titanium catback but i'm wondering if it will just put it into silly noise territory if full Titan.... hmmm...

Will sound porn ...

I'll be seeing them in a couple of weeks so will try record one of their cars but most of em have full system

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33

$1000 Delivered anywhere in Oz.

All pm's answered

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (On HOLD)

MIDORI SEIBI TITANIUM FRONT DOWN PIPE 80mm (SOLD)

APEXI POWER FC , COMMANDER & APEXI BOOST CONTROLLER KIT FOR GT-R 33 (SOLD)

  • 2 weeks later...

ENDLESS CC-RG BRAKE PAD SET (Front & Rear) now $500 delivered anywhere in Oz

Absolutely awesome pad !!

Good price especially with current value of yen to the Aussie dollar.

Will cost you a good $60-$70 more now to buy off nengun etc.

These are in my opinion without doubt best Street/Track pad around.

Full set of front and rear pads !!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...