Jump to content
SAU Community

Recommended Posts

Hey guys...

i would like some help regarding my car.

skyline r34 gt-t running a power fc, hks 2535, bosch fuel pump, splitfire coilpacks, 600cc injectors.

I'm not sure if the tune is out, but every time i try to accelerate over 3k rpm. it struggles and the exhaust pops a lot, makes no power at all.

I've asked a few people and some have said AFM, boost leak, dirty injectors. I've swapped the AFM meter over so that's out of the equation.

Any suggestions guys?

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/371159-help-with-skyline-r34-gt-t/
Share on other sites

thanks for the replies guys.. will look into it..

and elite racing.. its not last weeks thread.. created this thread today

regards

Oh sorry, it just looked exactly like a thread last week. And the week before and the week before that. My mistake. It's hard to tell these days

http://www.skylinesaustralia.com/forums/topic/358852-flat-spot-at-3000-rpm/

Here's one. It's still on the first page of forced induction. Try using search, it's probably the MOST common problem EVER encountered on these cars. There are literally hundreds of threads on this same topic. I'm actually surprised Ash hasn't put his generic search post in here and closed this. Oh well, one or two are bound to slip through I guess lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
    • Each to their own I guess  Me, I put just as much time into cleaning inside of the cars as I do on the outside As for getting wet, it is really no different than steam cleaning the carpets at home, apart from the cars carpet dries alot faster than the house, again, I only do it in the hotter months and leave the car opened up for a few hours As I only do it yearly, it is just before I do the diff and gearbox service, so I clean the carpets, then it's up on stands, wheels off, service, clean the undercarriage,  grease the bushings and do a nut and bolt check on everything  Disclaimer: I typically had all the time in the world to kill when I was working 🤣, so spending a full day or 2 cleaning, serving and "looking at stuff" was,  easily achievable, and a fun mental therapy day As for time to kill, I retired last Wednesday, so apart from my physical training, my days are filled with lots of random jobs around the house and garden...."Idle hands are the Devils something something" I am also buying a new house sooner rather than later, I'm actually looking at a potential property tomorrow, I'm looking forward to getting a car hoist as I'm starting to get to old to crawl around under a car, I can only imagine all the undercarriage cleaning and looking at stuff when that gets set up
    • Yeah, I'm not interested in wetting the carpets, and I don't care about brown dirt/dust that lives deep in the pile or underneath. It's not like I crawl around on them in my birthday suit or eat dropped food off them (because there is never any open food in my car). The seats are alcantara (cheap Chinese imitation alcantara, to be sure!) with barely 1" of foam pad behind the surface. That's not getting wet either. Any car that I would be happy to get the interior wet, I would not care to put the effort into.
    • We have one that holds 2.8L of water. On floor carpet that hasn't been touched in 2 or 3 years, will take a minimum of 2 fills of the tank to do a bedroom, and that's going AROUND the bed.   In the cruiser, I used an ENTIRE 2.8L tank, just on the front passenger footwell. But it had some fungus growing, and had been full of mud from being used as a 4WD for many years. I can do that floor again, and it will still pull mud out. However, the water now only looks dirty, not pitch black and leaving full sludge in the bottom of the tank it sucks back into. Oh, and, this is about a $1500 unit.
×
×
  • Create New...