Jump to content
SAU Community

Recommended Posts

Hey Guys

Just got my r34 impul side skirts delivered.

I tried pre-ftting with my mate, and we didn't get a long way - We played around with it for about an hour and we couldn't figure out what was going on. Had the car jacked and felt like all underneath was all out of wack.

When installing these, do I need to remove the original factory side skirt? It's about 40cm long right near the rear wheel. I felt like it was kind of in the way. Do I leave this on?

Does anyone have any photos of the impul skirts NOT on the car? I would really appreciate any photos provided of their impul skirts on their own.

When it comes down to it - I really need some fitment advice/tips/help!

Cheers

Link to comment
https://www.sau.com.au/forums/topic/371453-r34-impul-side-skirts/
Share on other sites

I had the sides off originally and again, didn't do too well.

I thought I could of left it on because of your photos charles. I can see you have your original factory one on still under your new sides.

I'm pretty sure this copy came from monkey warehouse (Because of the return address).

If anyone can supply some close up photos of your impul sides (With your door open) that would be highly appreciated.

Edited by wilorichie

I got Impul sides mate, if you are interested you are more than welcome to come check it out.. They are a bit shabby and plan to replace them with new ones but you're more than welcome to see how they were attached.

I had the sides off originally and again, didn't do too well.

I thought I could of left it on because of your photos charles. I can see you have your original factory one on still under your new sides.

I'm pretty sure this copy came from monkey warehouse (Because of the return address).

If anyone can supply some close up photos of your impul sides (With your door open) that would be highly appreciated.

Mine is a different sideskirt to yours though lol, and yes, my Nismo skirts just overlapped my factory skirts, but I know that there are some skirts out there that requires you to take off the factory skirts.

I PM'd you back Richie.. Forgot I changed them to bommex when I bought the car.. the impul got damaged.. so I decided to change.. Tottal had a mind blank.. Sorry

Maybe ask in QLD section as i'm sure a few others will have impul they will let you look at..

There is a good reason why there are heaps ;)

Because they are good!

Had mine fitter dori... It fit with the original skirt in tact. The guys that fitted it though didn't line up the side curves properly though... They fitted it really tightly but they had it slightly wrong lol...

Looks really good though, so doesn't line up like most other impuls... But it looks really good how it is lined up (looks like it is supposed to be like that... but its not lol).

Unpainted - Will be painting them myself now on Sunday. Which really sucks because I'm meeting up with sonnyQ (Clint) on Saturday for our tinting. My car is going to look like a bomb with those dodgey unpainted sides!! :(

I finished spraying the sides the other day, so grabbed the camera and took a few photos for those that where interested.

It is a bit of a story - I mentioned in another thread, that the body shop which fitted these didn't fit them like normal impul skirts. They put screws in the sides of the skirts into the side of the car, I was a bit upset.

I took the job home and wanted to finish it from there.

I left the screws in (holes already in the car) and filled up a little hole they left from the way they installed it.

post-50568-0-15028200-1311920411_thumb.jpg

Once it was fairly smooth, primed it as such

post-50568-0-61121500-1311920417_thumb.jpg

post-50568-0-98726800-1311920422_thumb.jpg

I had a booking with Clint (SonnyQ) for tinting and needed to drive the car - So had asked my misses to help me tape up the car again - Makes life much easier :D

post-50568-0-13885600-1311920431_thumb.jpg

Car is finally ready for painting

post-50568-0-02878800-1311920437_thumb.jpg

I wish I took some photos doing the coats of colour + clear but didnt :( Only have the finished result:

post-50568-0-45230000-1311920441_thumb.jpg

post-50568-0-17185300-1311920453_thumb.jpg

  • 3 months later...

Hey Mate

Ask Shane from PSI Parts. He will be able to sort them out for you.

[email protected] or [email protected]

I paid less for my side skirts for a mokey warehouse copy. They weren't to easy to install (I didn't do it either, paid some body repairs to do it and they said it was bloody hard). They are all fitted etc now, but if I was to do it again, I would purchase the skirts from Shane @ PSI parts. I purchased my rear bumper from him.

I think it was around $400-$450 for the bar delivered (or maybe plus delivery). The extra $100 to PSI parts for the quality fitting part is definitely worth it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
×
×
  • Create New...