Jump to content
SAU Community

Recommended Posts

if you have a power just monitor injduty and TPS

replacate

replacate with gate wired open

i would be gobsmacked if duty was less @ the same TPS with gate wired open

the physics do not support it

about 10 years ago a friend did this. I think he had a turbo starion at the time. He poped the clip off the actuator/flap

and noticed better economy. From memory the car was basically standard. It wasnt just a little bit of economy, it was

pretty significant. He drove it around like that for atleast 6 months.

It got me interested so I did the same to my car at the time. Quite funny driving around. Nearly like NA but it will

still pull really low boost up top. You can also hear the turbo trying to spool driving around but no boost. I noticed

better economy too but got jack of it and didnt last a week till the clip found its way back on.

regarding your switch/circuit. There are water injection parts that people sell off the shelf that when the systems

pressure switch detects a clog it will N/O or N/C to a safty trigger (solenoid) linked to your wastegate control to run wastegate

pressure. They also use it for low level saftey

imo go for it, wont be hard or time consuming to knock up. you will notice better economy but it might drive like shit.

The earlier your system produces boost the more fuel to be saved but also has the biggest impact on driveability

You would really need a tune to make use of it.

What everyone has been trying to tell you is that compression ratios, combustions chambers, cam profiles and ECU maps have all been set up for a TURBO. The best compromise you could get would be to run an ECU with dual map functions and actually TUNE the thing for no boost.

Thanks for everyones input...

I had a look this afternoon and ive got the components on the shelf at work so it wont really cost me a cent to try... I understand about the compression ratios, cams, ECU maps ect being set up for a factory turbo setting. I guess ill give it a crack and see how it goes over full tank of city driving and the best thing will be if you want to give the car a boot here or there it would simply be the flick of a switch and up goes the boost...

Cheers

A better approach to better fuel economy would be to buy a wideband O2 sensor that can output a narrowband signal, wire it in place of the standard O2. Get a NIStune and run O2 feedback across the whole map.

I will say however, if this is for your Stagea, it will be the biggest pig ever.. without VCT to help bring my laggy highflow on boost the heavy assed wagon was absolutely terrible to drive around town. Terrible.

And my fuel economy wasn't better at all. It was much worse because the engine was labouring trying to haul the wagon around when it really needed a bit of boost to help.

Or.. buy a 4cyl N/A daily.

so so many negative people! try it and see and report back your results, its better to do that than give these cocks the chance to spout off, in the real world they would just get a punch in the mouth and be on their way but this is the internet and the cock is free to shxit on everyone, I believe the idea is at least worth trying, best of luck with it!

I don't see the point in messing around and making your car go like a slug just to save a few penny's. It's already been said but i'll say it again... control your right foot better, that also goes with things like how you use your gears and how you decelerate.

Controlling how you bring on power with your right foot along with short shifting and letting the engine over run on deceleration are a sure fire way to save a good amount of fuel and not have to screw around and deal with a sluggish car.

If you're that desperate for fuel economy the word "hatchback" comes to mind.

The money saved on fuel (if web possible) set up like this, you will waste constantly changing plugs from being fouled, you'll also waste money on getting the soot cleaned from the rear bar. Not to mention since the car will be a slug, you'll be using more throttle to get going etc.

In the end, I will be a big useless waste if money. And, you bought a car that is powerful, to make it not powerful.

It's like calling a hooker over, to not have sex with her.

Tell Me, why didn't you just buy a toyota prius?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...