Jump to content
SAU Community

Recommended Posts

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

The RE001's were 'better' than the 595SS in my opinion. BUT, keep in mind the rather large price difference. For what the 595SS's are, I would get them again. I don't think the 595SS is really that far behind the RE001's, maybe you should consider the 595EVO (which is one between SS and RSR) or even the RSR's. I think if you get the SS expecting them to be the same or better than the RE001 you will be dissapointed, but if you get the SS looking at the price gap between the SS and the RE001, you will be pleased. If that makes sense. haha.

I wouldn't buy locally if you want a good tyres at a reasonable price .buy ad08s or dunlop speed stars for street tyres with grip. You can't expect a cheap tyre with performance to last ages. I run ku36 up front and federal RSR down back. Perfect combo for street Tyres that are good on track. If I wanted great on track, then obviously another set of wheels and semis would be ideal

I think unless you are competing (phillcom rally, etc) or have a large disposable income, dont bother with an amazing rim/tyre combo. Go a RE001, 595SS or KU36 and work on other small adjustments that will see your times drop.

but whats the point of spending $2000 on a set of real semis to cut a few seconds on the 3 practise days you attend a year?

no point in spending the coin for a few trackdays. there are plenty thougout the year, Ill be at the August 19th day

sorry J-rad, not everyone runs BCT's by choice

Maybe because my cars a daily driver, so cutting tenths of my drive to work isn't really that important to me.

But in the few weeks I drove around on Adrians CSTs with 595s I was impressed with them, never really tramlined or anything. Well worth it compared to KU36 etc

there is absolutely no way I would put top shelf tyres on a daily driven car. As it turns out, my 32 is daily driven, and the 595SS gives me a nice daily drive, but you can poke a bit of fun at them as well and they are fine. For $140 a corner, I simply cannot complain. Keep in mind that is $140 fitted and balanced, its all well and good to buy tyres from interstate for XXX price, but youve got shipping, then fitting and balancing. I'd rather give my money to a local business who is offering a good deal anyway.

but whats the point of spending $2000 on a set of real semis to cut a few seconds on the 3 practise days you attend a year?

Keeping in mind that your tyres are the only part of your car that touch the ground Damo :P

i'm probably going to either try some KU36's or 595 RSR's next time i need tyres.

for me, my car doesnt see much driving, but when it does i want it to grip well. last thing i want is something that will just spin if i put the foot down. for some reason spinning wheels doesnt get me hard like it does other people.

if i drove daily and needed the tyres to last, then i'd go for something harder compound and maybe not as much grip.

now i got a house and the missus can see the bank account, i've gotta spend wisely on the GTR

i'm probably leaning to the RSR's because for the price from option 1 garage, i can rotate them better since my car does get a bit of camber wear on the inside. and i think KU36's wont last and i'll have one side bald with heaps of tread on the outer side

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...