Jump to content
SAU Community

Recommended Posts

GCG Hi-flow turbo with VG30 rear housing, good condition, suit rb25. Also comes with a standard rear housing $1000

APEXI Boost control kit (PFC add on) $350

Datalogit with cables and software $350

Nismo twin plate clutch $700

greddy copy intake manifold, polished $200

Clear timing belt cover $50

Adjustable cam gear $80

(new) adjustable castor arms $150

(new) sub frame alignment kit (pineapples) $60

(new) heavy duty polyurethane gearbox mount $60

(new) RB30 oil pump drive collar $100

Also have a few standard parts

Sway bars

S2 front bar with fog lights

standard side skirts and rear wing

I/C cross over pipe

Make an offer.

All parts located the far south coast NSW .

I will post at buyers expense.

any info on the specs of the highflow? cheers

GCG link below.

My link

These are the ducks guts of Hi-flows, ball bearing, 100% bolt on.

and with the VG30 rear housing it's capable of 260+ rwkw.

Have a search around the forum, there are plenty of discussions about them.

Edited by Hootchy

I bought the turbo 2nd hand with about 10,000k's. I had it on the car for about 2 years and did less than 15,000k's.

It has minimal shaft play.

Here's some pics of other parts post-24599-0-03597800-1312978745_thumb.jpgpost-24599-0-03715800-1312978758_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...