Jump to content
SAU Community

Recommended Posts

Ok, my 370gt just arrived and of course the Battery is completely dead. Probably has been for some time now as the car is actually unlocked and now I dont know how to lock it again.

My question is, should I just fork out for a new battery or can I use this thing that I have lieing around to jump start it.

http://www.supercheapauto.com.au/online-store/products/Best-Buy-Jumpstart-600Amp.aspx?pid=213237#Description

Basically I am worried about it frying something ie. Computer and even if there is only a tiny chance of it doing so I would rather pay the money for a new battery.

I bought it for my old bike but havent used it for at least 1 year so I am charging it as I type. Mine isnt EXACTLY the same as the picture (mines red) but it IS the 600 Amp one, which I think may not be strong enough to kick the engine over anyway.

Link to comment
https://www.sau.com.au/forums/topic/372815-noob-jump-starting-question/
Share on other sites

That unit won't even close to turn over your car (well may turn it over, but is unlikely to start it).

Don't be cheap - you just bought a $40k car - buy a new Odyssey or similar sealed battery for it. Or even better spoil your Skyline and go AGM.

Those things do work (assuming its decent)

I used one to jump start my old VL when it went flat

HOWEVER

they are good for one.... Maybe 2 attempts at starting only. They drain rediculously quick so if your cars been sitting for a while and needs to crank for a bit to sort itself out then it might not work

Have to agree with what 'Nightcrawler' but. May as well buy a new battery for it anyway, doubt the one in it now is going to be any good if its been sitting that long. But worth a try if you can jump start it and give it a charge it might still work.

Thanks for the replys.

Basically confirms what I was thinking. Any other brand suggestions welcome.......Where in Perth sells good quality batteries, I have a feeling Supercheap etc only sell basic stuff.

Edited by Alkatraz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...