Jump to content
SAU Community

Recommended Posts

  • Replies 114
  • Created
  • Last Reply

Top Posters In This Topic

i'll be getting it for PS3.:thumbsup:

Anybody else play 40k? as in the real game?

Ill be getting it for PC

And i play 40k too, i have a Necron army and an Imperial Guard army.

Though i only use my Guards as Necrons suck in the current rules.

i'll be getting it for PS3.:thumbsup:

Anybody else play 40k? as in the real game?

I used to, from 1993 through to about 2004. Now I just paint them from time to time when I get bored!

Bought this game yesterday afternoon, loving it! Have not been able to get online yet. It wont let me connect to a game. Will have to investigate why when I get some time tonight.

Used to play it in the late 1990's

Wouldnt mind playing it again (and fixing up my miniatures which need it badly) but go near a games workshop shop and there's just too many kids - fu(k that

Used to play it in the late 1990's

Wouldnt mind playing it again (and fixing up my miniatures which need it badly) but go near a games workshop shop and there's just too many kids - fu(k that

And it always smells bad

And it always smells bad

Any time i go into the store one of the staff members always manages to corner me and lock me into a conversation about 40k for some stupid reason, then because i am too polite i go along till i can find an ethical way to bail which is at least 20 mins later.

Not much need to go there these days with online stores offering far better prices on 40k models.

Any time i go into the store one of the staff members always manages to corner me and lock me into a conversation about 40k for some stupid reason, then because i am too polite i go along till i can find an ethical way to bail which is at least 20 mins later.

Not much need to go there these days with online stores offering far better prices on 40k models.

I went there to get a book the other week and it was the same thing, stuck for f**king ages for no good reason, I think it is store policy to act like the customers best friend....because really a lot of their customers could probably do with a new best friend lol :P

what website to you use for purchasing models Chappy??

I used to play then stopped as all my friends left my school who played with me,

now i just play the PC games given the stupidly expensive price of the models nowadays:( i remember $35 would get you a space marine squad, now it barely gets you a blister pack

what website to you use for purchasing models Chappy??

I used to play then stopped as all my friends left my school who played with me,

now i just play the PC games given the stupidly expensive price of the models nowadays:( i remember $35 would get you a space marine squad, now it barely gets you a blister pack

Maelstromgames.co.uk used to be a great place to buy from, till GW changed the terms and conditions that restricted UK sellers from selling to people outside the UK. If you know a good forwarder though you can get away with it.

There are some good sellers on Ebay too

wizardsgames (user) or RED DRAGON GAMES (store)

abadd0n (user) or Abaddon's Warchest (store)

It can also be cheaper to buy straight from the GW site in the USA and send them to a freight forwarder.

oh ok cheers mate,

I did notice how cheap stuff was on ebay,

does it appear to you that some people must be making duplications of some sprues on ebay??

as who knows where a person would get 50 sprues of the torso of spacemarines etc etc haha...

Pity we get ripped off so bad in australia for stuff like this :(

oh ok cheers mate,

I did notice how cheap stuff was on ebay,

does it appear to you that some people must be making duplications of some sprues on ebay??

as who knows where a person would get 50 sprues of the torso of spacemarines etc etc haha...

Pity we get ripped off so bad in australia for stuff like this :(

They buy bulk battleforce packs then split them up and sell them individually.

DL the demo for ps3 on the weekend, how brutal is it!!!

awesome

i buy all my miniatures from Black Cultist. 25% off all GW products and free delivery in the ACT.

Im currently building Space wolves and IG armies. also have Tau and Ork. i used to play from mid nineties to mid 2000s but now just paint/model in my spare time.

The "stun and execute" thing? fkn awesome. and SO violent!

I like the one on the nobs where you pin thier foot to the ground with the power axe and pull thier jaw off! lol

This game almost made me like Ultrasmurfs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...