Jump to content
SAU Community

Recommended Posts

my old man is moving to australia at the end of the year and is planning to bring his +4 morgan and triumph tr3 over with him,

whats the go with how to get them over here to brisbane and who are the best companies to do so? they are both LHD one is in running condition the other needs an overhaul.

any help would be great.

cheers

riley

Link to comment
https://www.sau.com.au/forums/topic/373957-importing-from-canada/
Share on other sites

Both will be fine to import, and can also be registered LHD anywhere in Australia. If you're old man wants help with it, tell him to drop me a line.

he's right about the triumph, but the morgan yes its an old car but its the only hand made( completely) car in the world even though the year model is in the 60's it was manufactured in 1994.

the morgans chassis is also made of wood lol is that going to be a problem to import?

and do u have a rough price it would cost to ship them both at the same time? like a bundle deal

+1 it is flat as at the moment ( Oz market is not that much better.)

just found out that its only a problem to import raw wood, so the morgan should be fine ( minus the obvious clean it needs before shipping)

iron chef any idea what the price would be, and is it cheaper to import two than just one?

if you import 2 cars at the same time there is potential to save a couple hundred dollars here n there.. but ultimately no it isn't cheaper because most of it is government charges and labour...

as for the wood thing - please get clued up on modified pre 89 imports.

it basically is there to stop people like hot rodders from bringing in:

Model T Ford w/ chopped roof and 15in wide rear wheels with a custom tub rear, with an LS7 engine conversion... that has been built onto the chassis of a chrysler PT cruiser in 2007.

^^^ it was to close the loophole that gave potential importers the ability to import "pre 89" cars with them being pre 89 purely on face value.

however in the wake... it's affected an entire market of people unable to import their cars. I should also note that import approval is still given the "yes" or "no" approval by the same people and REALISTICALLY not much has changed.

however you mentioned something something something built the car out of wood because you thought it was cool to be Armish in 1994 - :P

in that example its best to speak to australias dept of transport about it.. just in case. would hate to see youre claptraption be declined import approval due to no homework being done..

..that's all i was saying :)

just found out that its only a problem to import raw wood, so the morgan should be fine ( minus the obvious clean it needs before shipping)

iron chef any idea what the price would be, and is it cheaper to import two than just one?

Shoot me an email mate (see my sig) and we'll get you some prices. The wood won't be a problem. To answer your last question, probably not ;)

if you import 2 cars at the same time there is potential to save a couple hundred dollars here n there.. but ultimately no it isn't cheaper because most of it is government charges and labour...

as for the wood thing - please get clued up on modified pre 89 imports.

it basically is there to stop people like hot rodders from bringing in:

Model T Ford w/ chopped roof and 15in wide rear wheels with a custom tub rear, with an LS7 engine conversion... that has been built onto the chassis of a chrysler PT cruiser in 2007.

^^^ it was to close the loophole that gave potential importers the ability to import "pre 89" cars with them being pre 89 purely on face value.

however in the wake... it's affected an entire market of people unable to import their cars. I should also note that import approval is still given the "yes" or "no" approval by the same people and REALISTICALLY not much has changed.

however you mentioned something something something built the car out of wood because you thought it was cool to be Armish in 1994 - :P

in that example its best to speak to australias dept of transport about it.. just in case. would hate to see youre claptraption be declined import approval due to no homework being done..

..that's all i was saying :)

ok lets clear sumthin up.......the amish were cool in 1994 and still are.....i wish i was amish.....churnin butter and stuff...................and the chassis is wood cause its lighter and easier to replace than steel. dont worry i hang shit to my old man about owning a car made of wood. thanks for the info. and iron chef ill get the details and try to get my old man to sort a date and stuff out with u

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...