Jump to content
SAU Community

Revs Jumping When Turning Steering Wheel

LOC033

By LOC033,
in General Maintenance

 Share

Recommended Posts

LOC033 Newbie

LOC033

Posted
Posted

Hi just bought my first skyline it's a n/a r33 I have noticed a couple of small faults but one thing that seems to be odd and bugging me is when I go to warm the car up and I turn the steering wheel the revs seem to jump abit not by much maybe 200-300 rpms not sure what seems to be the problem doesn't affect the driving really but just curious to know what seems to be the cause . I'm also curious about the 2 lights I have on my dash one says "SLIP" and the other "4WD" I have seen other r33s with this but not sure what they mean or when the light actually comes on . Anyone know anything about these things and could let me know ? Thanks :)

jhjones Rising Star

jhjones

Posted
Posted (edited)

The revs jump when you turn the wheel because the power steering runs off the engine and the engine revs itself the stop it stalling. Same goes for air-con.

I'm guessing "SLIP" means loss of traction? "4WD" means 4 Wheel Drive. You must have a GTS4.

Edited by H4x
LOC033 Newbie

LOC033

Posted
  • Author
Posted

slip light means the rear wheels are loosing/lost traction, and when it stays on it means the front wheels are pulling the car. 4wd light means there is something wrong with the 4wd system, from my understanding

I believe your right about the 4wd light cause I removed the 4wd relay from the boot and the light turned on and stayed on . So does that mean the gts4 are only 4wd when the rear wheels lose traction ? Do you also know anything about it being 4 wheel steering ?

Cheers

LOC033 Newbie

LOC033

Posted
  • Author
Posted

if no hicas then no 4 wheel steering

Yes I do see hicas in the relay box , so from what you read is it safe to say I have a GTS4 ?

Just for future reference what is it that makes a gts4 ? Is it the 4wd ? Or the 4ws ? Or both ? =/

And my final question is does anyone Have any information about the LSD, it's an import too if that helps ? Cause there is a relay saying 4wd LSD is it safe to take this out and drive ? Will it even make it rwd ?

kawasakirider Grand Master

kawasakirider

Posted
Posted

The revving up whilst turning is normal, as explained above. But the thing is, to hear it or for the engine to do that whilst turning, you must be stationary. You should never turn the wheel of a car while it isn't moving, if you're an OK driver, there's no need to. It puts undue stress on the steering components, specifically the PS pump.

defari Grand Master

defari

Posted
Posted

Yes I do see hicas in the relay box , so from what you read is it safe to say I have a GTS4 ?

Just for future reference what is it that makes a gts4 ? Is it the 4wd ? Or the 4ws ? Or both ? =/

And my final question is does anyone Have any information about the LSD, it's an import too if that helps ? Cause there is a relay saying 4wd LSD is it safe to take this out and drive ? Will it even make it rwd ?

from what i can remember most came fitted with hicas (there should be a light on your dash, a big metallic unit sitting in front of the rear diff)

as far i as i can remember the gts4 was awd (based on the whole gtr attessa system) 4 wheel steering (hicas / super hicas in some cars) is just a factory option although most came fitted anyway.

& the lsd transfers power to the wheel(s) that aren't gripping when there is a loss of traction... in retrospect - drifters lock their diff so its the same amount of power to both wheels irrespective of traction - thus makes it easier to keep the rears spinning when drifting / linking corners..

Dingus Proficient

Dingus

Posted
Posted

GTS4 comes with ATTESSA AWD out of the GT-R; all GTS4 have the AWD, otherwise it'd just be a GTS.

Most Skylines have HICAS (4 Wheel Steer), pretty sure was standard on all but the most povo-spec ones.

Yo-Yo Grand Master

Yo-Yo

Posted
Posted
the revs seem to jump abit not by much maybe 200-300 rpms

If it's sort of jumping from idle by 2-300rpm when you lock the wheel either side, as others have said it's nothing to worry about, but have a look under your car & check the condition of the usual suspension stuff like end links, ball joints & rubber cv boots etc

central coast person Proficient

central coast person

Posted
Posted

All cars with belt driven power steering have a power steering pressure switch with sends a message to a AAC valve which idles the engine up to stop it from stalling with the load created on the crankshaft.

Your car is a GTS-4 simply look in your engine bay at the fire wall and if the engraving is ENR33 (6 numbers) then thats a GTS-4. Slip light is simply loss of traction, the system is RWD and depending on how much slip the computer reads from a lot of sensors about 100 times a second it will send power to the wheels anywhere from 0-50% to the front.

All GTS-4's that are R33 and R34 NEVER came with HICAS (4 wheel steer) from Nissan because they are non-turbos and with the 4WD parts in the car making excess weight they did not follow in fitting it. The GTS comes with it because its RWD and 60kg lighter. I wouldnt worry about HICAS though, everyone sees the light sooner or later and just locks the 4 wheel steer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      "Cheap" bolt on turbo on RB25DET NEO

      By Murray_Calavera · Posted

      The fab work can be as simple as a couple of silicon hoses and clamps to the factory piping. 
    • joshuaho96
      "Cheap" bolt on turbo on RB25DET NEO

      By joshuaho96 · Posted

      Just sounds like either way you need to do some fab work to get everything to fit, so why limit yourself at that point? If the GCG high flow option is zero effort in and out swap though I'd probably do that. It's almost certainly lowest risk, lowest cost, etc. The HKS GTIII-RS option that Kapr mentioned is laughably expensive for what it is, they charge the exact same for two turbos on the RB26 so their margins are off the charts on that thing.
    • GTSBoy
      "Cheap" bolt on turbo on RB25DET NEO

      By GTSBoy · Posted

      Intake manifold is not a part of the issue. The turbo bolts to the exhaust manifold. That is easy. But close your eyes and picture the physical situation. That is a T3 flange on the manifold and a T3 flange on the turbo. As long as any new turbo has a T3 flange on the exhaust housing, that exhaust housing will bolt to the exhaust manifold. This places the exhaust housing in the same place as the stock one. But now move your mental attention a little further forward. The location of the compressor housing is set by the length of the turbo's core. The stock turbo had a long core. Let's say that it is..... 100mm long. So that would place the compressor housing 100mm forward of the exhaust housing. But a highflow, might well have a centre core that is shorter. Let's say that it is only 70mm long. Now the compressor housing will be 30mm further back in the engine bay than the stock one. This DOES move the turbo's compressor outlet backwards. It also moves the compressor's inlet backwards. You will very likely have to do some work to both the inlet and outlet piping to make everything connect again. I am not say this to make it out to be a bigger deal than it is. I am just pointing out that "bolt on" is sometimes not quite bolt on. The highflow from GCG that Murray linked above (https://gcg.com.au/turbo-charger-upgrade-skyline-gtst-2iu-xtrgts-s1.html ) uses a core that is the same length as the stock core, and so does not require this extra work. It will look very much like the stock turbo. No-one uses GTR turbos of any flavour (stock, or aftermarket) in a single turbo application on RB20/25. It's not a thing. Yes, people have been putting on GT3076, GTX3076 (and bigger and smaller versions of those) and G30s (of various sizes) onto RB20/25 since forever. But these are not "bolt on". Everything except the 4 bolts to the exhaust manifold change with these. And genuine Garretts are expensive. Non-gen, like Pulsar, etc, are cheaper, variously as good or nearly as good. But still not bolt on. No-one in the right mind would pay for an HKS turbo. Not in this modern day and age. Well, yes, the GCG highflow. You could ask HG what he can do to make the compressor housing sit in the original location. There are surely others doing highflows around the world. And some of the eBay/Temu ones (as reported by Dose) work and don't die. Bit of a lottery though. I would send your turbo to GCG (here in Oz) to be highflowed if you want a trivial no-extra-work option. But seriously, the work required to change inlet and outlet piping is not that hard. That's a boost control problem, not a turbo problem.
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      Thank you all for the replys 🙂 I know that intake would be different but that is one pipe at it is not that hard to get(custom one). I meant mainly bolt to the stock manifold and the turbo elbow. I looked and many sites/forums but they are just "old" with some old HKS turbos from GT-R i guess? What about some Garrets?  Or any other turbo? Is there even a turbo which i can just bolt on? 😄 And yeah i know about that new HKS but that is like 2000k USD without taxes/shipping in here   Iam getting a touch up tune but my "problem" is that on the "not" hot day iam getting peaks around 0,9 bar...and when it was around 15 Celsious i saw peak around 1 bar which is just too much for stock turbo. And of course turbo is old and i like to get some new one for a piece of mind 🙂 
    • GTSBoy
      new here

      By GTSBoy · Posted

      I'm working on the assumption that our friend Jasmine here is a Russian (or, possibly Ukrainian) spammer/spambot, based purely on the number of such that I have been having to neuter in the last few weeks. IP address for the OP above was in WA. But that could have been via VPN. Posting at quarter to 4 in the morning is a good sign of being from somewhere in Europe. The last Jasmine that I kicked in the cooch was IP addressed in Ukraine. Even that could have been via VPN, and the bitchbot could have been from Russia, Serbia, China or anywhere. Regardless, was a spambot, so I killed it with fire. The fact that our new friend Jasmine here did not respond in any way to my tart query strongly suggests to me that this OP was just the establishment phase of a user able to be activated for spamming in a week, or 3 or 10.
×
×
  • Create New...