Jump to content
SAU Community

Recommended Posts

Hi all.

just wanted to introduce myself and my new 98 R34 S1 GT-T.

ive been hanging round cars for quite some time.

i used to own a 73' Celica TA22 - which i put a 4a-ge bigport in (with exhaust etc etc).

i used to stop around toymods quite a bit prior to this.

now i own a skyline with a 3" blitz turbo back exhaust, pod and turned up turbo (r32 solenoid??)

fuel efficiency is horrible on this thing, i think its the lack of tune - so i plan on returning the airbox and removing the pod (putting a nice panel filter in there), and putting on a return flow FMIC on the front.

shortly after that, throwing a nistune in there and getting it turned asap!

i dont want any attention from the cops therefore im quietening down my exhaust (which is too loud atm). i plan on replacing the cannon to a nice oval muffler and having twin tips.

question: if i have twin tips facing down, will this quieten the sound coming out of the car (ie. sound is logarithmic, and based on intensity (3dB is a double in intensity) - so therefore if the sound is directional (ie. throwing straight at the microphone from a cannon, surely hitting the ground / dissapating) would quieten it down.

is there a legal limit to how far it points down?? i had a talk to a fella at daalder exhausts in box hill, he wasnt on the same page i was on - suggested a whole new exhaust.

i dont have boost controllers / turbo timers or none of that crap and i drive it responsibly, giving it the occasional squirt once in a while (not into burn outs etc) :)

anyway, i have plenty more questions which hopefully i can ask wednesday night (does any one mind if i come along??)

thanks and nice to meet you!

Tim

Link to comment
https://www.sau.com.au/forums/topic/374085-introducing-r34-gt-t/
Share on other sites

Hey harey are u still using jim berry clutch?? I read ur comment on JB clutch in the clutch section, who/where did u got it installed? As im getting jim berrys clutch soon.. Sorry to hi-jack these thread.. Lolz.. Nice 34 btw!!

Edited by myRB25DETT

hey tim,

love the look of ur car mate!

there is no limit in regards to the angle i dnt think.. but if u do want it 100% legal u pretty much need a stock exhaust or a VERY well designed customed made one($$$$).. I got defected a few weeks back n got a full epa.. took the car to get tested and got 87db and 89db on back off with a stock catback exhaust system and 3" front and dump pipe.. it doesnt matter how low u point it at the end of the day they can chcsk ur car on a hoist and test it which means ur theory of the sound hitting the ground would useless..

cheers

Herbie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...