Jump to content
SAU Community

Recommended Posts

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Standard front and rear struts with lowered rsr springs, no leaks worked well, replaced them with height adjustable coil overs when i got defected for too low (the only part of the car that was too low was a flange on the exhaust) $275

post-27276-0-94791400-1313383691_thumb.jpg post-27276-0-90965700-1313383707_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

S1 R33 indicators with built in driving/fog lights $40

post-27276-0-44095900-1313383302_thumb.jpg post-27276-0-13833300-1313383322_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/
Share on other sites

how much you want for the front and rear shocks? Could you please sms me reply on 0404085915 thanks

Do you meen without the springs? if so im not willing to separate atm, price is up there for the lot or throw me an offer.

All pm's have been replied to.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5968262
Share on other sites

Struts and Mspec lights sold, also have a HKS mushroom pod.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

Everything else below is still available.

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5969955
Share on other sites

Adding a S1 vented fibreglass bonnet:

Good condition, does not come with washer jets $200

post-27276-0-38573200-1313905951_thumb.jpg post-27276-0-73428000-1313906196_thumb.jpg

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5977235
Share on other sites

Bonnet sold.

grill, hks pod and dump pipe sold pending payment.

Below is what is left.

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Edited by W0rp3D
Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5983285
Share on other sites

Dump pipe, pod and grill back up for sale.

Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

Crank angle sensor, bought it to try to fix a problem but the cas was not the problem $70

post-27276-0-39312500-1313383342_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5985994
Share on other sites

CAS sold.

HKS mushroom pod, Comes as pictured, it did have a securing bracket but that seems to have gone missing, if i find it before it is sold i will include it other wise it does not come with it $60

post-27276-0-19229200-1313490990_thumb.jpg post-27276-0-15147200-1313491010_thumb.jpg

1 piece split dump pipe (i believe its a jjr one) $150

post-27276-0-77103500-1313383632_thumb.jpg post-27276-0-78181600-1313383653_thumb.jpg

Blitz BOV, has an attachment (flange needs to be welded to the tube) to plumb it back if mounted in the factory position, DOSE NOT come with the adaptor to mount in the factory position $60

post-27276-0-92676600-1313383389_thumb.jpg post-27276-0-96208500-1313383417_thumb.jpg

6x factory gtr coils (Will also fit S1 R33 and R32), all worked well, i replaced them with yellow jackets when i put the 3540 on $120

post-27276-0-75948700-1313383503_thumb.jpg post-27276-0-69864300-1313383518_thumb.jpg

S1 igniter, once again bought to fix a problem, it wasnt the igniter either, i have 2 of these $90 each.

post-27276-0-75980300-1313383667_thumb.jpg

S1 R33 grill with red S badge, replaced with GTR style grill but i didnt like the red badge so i swapped it for the factory chrome one, two clips missing of the back, just missing not broken, if this is to replace a damaged grill you could probably get a couple out of the one, how ever the center one is broken off, only ever had 3 or 4 of them on when it was on the car and was 100% secure without the middle one $30

post-27276-0-22794100-1313383447_thumb.jpg post-27276-0-82797200-1313383479_thumb.jpg

Factory gearbox speed sensor, came off a S1 R33 gtst no idea what other models it would fit, one again bought to fix a problem and that was not the problem $60

post-27276-0-13108800-1313383366_thumb.jpg

Battery box, no strap or brackets $30

post-27276-0-42989400-1313383722_thumb.jpg

All prices are negotiable so throw me an offer, will also swap for an unmolested Mspec front bar and reo (happy to deal if you have either or both) for a S1 R33 gtst.

Link to comment
https://www.sau.com.au/forums/topic/374105-r33-parts/#findComment-5986654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...