Jump to content
SAU Community

Recommended Posts

either the button isnt tight on the stick, pull the bottom of the stick down and make sure the sirclip is in the correct spot.

or u have to have the key in the ignition and foot on the brake otherwise it wont move

yeah you need the ignition on and your foot on the brake pedal.

if thats not working, its probably the solenoid that activated the locking mechanism. there is a manual override next to the park position. pull out the little stopper and stick a screwdriver in the opening. it will release it

this is on an M35. C34 might be similar.

Hey thanks for the help guys. My foot is on the brake. I know I have to do that for the shift lock. On the c34 I can't see any manual release thing for a screw driver. I do know what they look like I've seen them on new cars. I am looking for it. Where is it? I have called mechanic b says it's electrical problem. Because I can hear the click sound when it unlocks but then it won't move dam it.

I DOUBT its an electrical fault.

The lockout for park on these cars runs off a PHYSICAL locking cable that runs from the shifter to the underside of the ignition barrel.

The cable up and to the left of the shifter in this car is the Lockout cable.... see how its been removed for manual conversion. Pull your centre console out and have a look to see if its still in place and then look under your barell to make sure its not causing issues for you.

http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=298844

Alrightey I fixed it. It was the ignition cable. Runs from the console to the ignition. I took off all the plastic under the steering wheel to trace the cable to the stick. Injust gave it a pull and it's fixed. I've played around with it and now it's better than before. Thank kidafa for that link and everyone else.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...