Jump to content
SAU Community

Recommended Posts

hey everyone, looking for some help for a mate of mine

car is a series 2 s14 we have just put an rb25 into..problem is the limiter sounds strange, i mean real strange... almost completely flat like a diesel limiter and when held on limiter the car bogs down rly hard and starts to drops rpm....kk dont give me advice on how its a normal limiter and im retarded coz its not!...lol

things that have been to try and solve problem : ECU changed, sparks plugs changed, ign timing checked with light...

engine has had timing belt changed before he bought it, does this sound as though its a tooth out? even though car runs fine and pulls hard for standard turbo....

it is pretty standard with just a turbo back exhaust and front mount and boost t....and splitfires

any help is appreciated.

Link to comment
https://www.sau.com.au/forums/topic/374981-question-about-unusual-limiter/
Share on other sites

no we havent... running a standard reg atm with i think a wallbro 255.. will have to check that then... fuel pump is probs ok made 320hp with the sr20 in it before.. cheers for the suggestion

Keep bashing that limiter and you will need to start your expensive conversion all over. The oil pumps in RBs are very weak and make the motor almost suicidal from stock. The reason why is because of the way it is driven off the crank, hitting the limiter will smash the pump to bits and have you nuke your whole motor in seconds not knowing you have no oil flow.

If you did this conversion for a limiter loving drift or burnout pig you really picked the wrong motor. Lucky you this website is filled with an abundance of references to just how bad a choice it was. Just search 'oil pump fail'.

As for the question, sounds like every other stock ecu RB ive smashed limiters with, in fact id be pretty confident I could find a video of my ex diesel limiter RB25.

both of u calm down lol... ino of the problems with rb's and oil... car is used for drift so obviously sees a fair bit of limiter... just after advice on how to fix this...

his old r33 gtst limiter was NOT LIKE THIS... it is not normal...

any more advice?

just thought id post this up because i was warned and its slightly amusing... clipped the limiter driving home tonight and BROKE THE OIL PUMP... haha :)...

to all the non believers u have been warned lol

Keep bashing that limiter and you will need to start your expensive conversion all over. The oil pumps in RBs are very weak and make the motor almost suicidal from stock. The reason why is because of the way it is driven off the crank, hitting the limiter will smash the pump to bits and have you nuke your whole motor in seconds not knowing you have no oil flow.

If you did this conversion for a limiter loving drift or burnout pig you really picked the wrong motor. Lucky you this website is filled with an abundance of references to just how bad a choice it was. Just search 'oil pump fail'.

As for the question, sounds like every other stock ecu RB ive smashed limiters with, in fact id be pretty confident I could find a video of my ex diesel limiter RB25.

really? they heaps weak hey?

i wonder why theres so many rb20/25's in drift that smash the limited all day every day without issues ;)

really? they heaps weak hey?

i wonder why theres so many rb20/25's in drift that smash the limited all day every day without issues ;)

are they different simon? my mates old rb25 copped abused for 2 years before he sold it... like a set of tyres a week abuse... never missed a beat...

different from what? it seems to be the 26's that die before anything else.

rb's not as weak as people make them out to be.

certain parts are (like the pump, as OP just updated with lol)

Otherwise from what I've gathered, some people CAN'T break them while others do without trying....piece of string etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...