Jump to content
SAU Community

First Pc Build - Thoughts?

savage1987

By savage1987,
in PC & Games Discussion

 Share

Recommended Posts

R31Nismoid Grand Master

R31Nismoid

Posted
Posted

trust me Ash they are, but 3 dead OCZ drives out of the 20 or so in circulation in and out of the office in peoples home pc's etc dosen't really fill me with confidence vs 0 dead raptors

They aren't if they are dying/corrupting. And this is the major issue I have and the reason I've not upgraded.

Reading some reviews that actually do some proper testing and investigations, most of the feedback does not instill me with a great deal of confidence.

No doubt they are faster etc, well aware of that - but losing data is a PIA, rebuilding the machine, intermittent issues... None of this I've ever had with HDD's, and I've got 10 running 24x7 and have for years.

bozodos Grand Master

bozodos

Posted
Posted

it's only the Sandforce ones that are problematic, our first batch of Latitudes with the OEM Samsung ones are solid as rocks, despite being imaged multiple times and used quite a lot.

From what I've read, data is actually safer on SSD than mechanical disk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • thatjawncrazy
      Another "where do these lines and plugs go" RB25DET question

      By thatjawncrazy · Posted

      GTSboy, thank you again. i’ve been reading all the other SAU RB25 vacuum line threads and you have the utmost patience for people asking “where do my vacuum lines go”. it’s appreciated. i did also enlist a few other RB guys local to me.  i would like to run 5 to 4. turbo pressure side to wastegate actuator. i would like to run 3 to 1. power steering air valve line to intercooler outlet. (this is how it was previously). i was told 2 is the bleed port for the boost solenoid - which i’m not running - so should be capped.   anyone see any problems with that?    
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
×
×
  • Create New...