Jump to content
SAU Community

Recommended Posts

Hey guys, I have a r32 gts4 with a rb20 in it.

I noticed the other day while sitting in traffic That the oil pressure had gone right down to the top of the "0" mark, it only does it when im sitting in traffic or going slow around town but when it's cold it's fine the pressure sits around 6, once warmed up or on the high way it sits around 4 but as soon as I get into town it drops down. Please explain what and why it's doing this, and how do I fix it?

P.s I only have the shit stock oil pressure gauge at the moment

Link to comment
https://www.sau.com.au/forums/topic/375340-rb20-oil-pressure-sits-near-0/
Share on other sites

It is possible, check your dip-stick. As James said, best to be getting the oil changed if it is unknown. But the fact you said it sits around 4 bar while driving makes me think the viscosity hasnt dropped that far yet.

Check the workshop manual, at idle i think its suppose to sit between 1 and 2 bar.

I had the same problem and I had it tested on service, it was faulty sender.

Best get an oil pressure test or quality aftermarket gauge to end your worries.

Get an aftermarket pressure gauge now.

Do an oil flush with good oil no cheap shit.

If u still have problems, get the oil pump checked, my rb20 gts4 did the EXACT same thing (only just bought it) and I thought it was dodgy gauge, till light came on and I knew I was f**ked. Now I'm up for a rebuild.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...