Jump to content
SAU Community

R34 Gt-R Engine Package!

pj-33
 Share

Recommended Posts

pj-33 Experienced

pj-33

Posted
Posted

Up for sale is my R34 GT-R Engine which has done around 57,xxxkm's, and will be sold as a package.

Immaculate engine with not a problem.

Comes with HKS forged internals, HKS cams and cam gears, HKS injectors purple tops (can't remember size, but car made 350awkw+ with no headache's).

Twin Apexi AX53B60 turbo's that come with braided lines and nismo front and dump pipes and a power fc that is already tuned for this package.

The package includes pretty much everything, so as far as i know, you can install straight away. Won't need to waste your time shopping around for missing parts cause it includes everything.

I am asking $11,000 for the hole lot. I might be slightly negotiable, but it is advertised at a really good price considering the cheapest r34 GT-R engine i seen was about $6,000, and that's a stock engine with no turbo's etc.

Not interested in part out unless someone offers a good price for the turbo's alone or the power fc.

Also have R34 GT-R brembo calipers x4, brembo pads and rotors x4. So basically everything. I am asking $2,500 for this.

Contact me on 0425 717 715 if interested. Don't really check the computer much often, so to get a hold of me, your best option is calling/texting me.

Please no time wasters or low ballers.

post-47114-0-14996600-1314414824_thumb.jpg

post-47114-0-71345100-1314414858_thumb.jpg

post-47114-0-04221700-1314414906_thumb.jpg

post-47114-0-04101800-1314414934_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/375358-r34-gt-r-engine-package/
Share on other sites
vesh Proficient

vesh

Posted
Posted

Out of interest, how do you know the specs of the engine?

I was going to buy this car at the auctions, but then noticed that there was no oil cap . . .

Still doesnt seem to have an oil cap like the picture you posted above??

krayzie32 Mentor

krayzie32

Posted
Posted

Neat buy if it can all be verified

I've been told Pistons, Rods, Injectors & Gaskets basically all the upgrades were done 6000kms before accident.

So basically pretty fresh.

And very cheap...

pj-33 Experienced

pj-33

Posted
  • Author
Posted

Neat buy if it can all be verified

I've been told Pistons, Rods, Injectors & Gaskets basically all the upgrades were done 6000kms before accident.

So basically pretty fresh.

And very cheap...

Thanks mate. It is very cheap mind you im pretty much selling for the same price as a stock r34 gtr engine. So i have no idea why people would be complaining and low balling.

pj-33 Experienced

pj-33

Posted
  • Author
Posted

Out of interest, how do you know the specs of the engine?

I was going to buy this car at the auctions, but then noticed that there was no oil cap . . .

Still doesnt seem to have an oil cap like the picture you posted above??

You definitely have the wrong car buddy. This car was owned for a year and a half. Put the HKS oil cap on my s15 and covered the hole with the rag. Just took a picture without a rag so people can see the hole engine rather then half covered. This is a for sale thread by the way not a discussions thread lol.

  • 2 weeks later...
pj-33 Experienced

pj-33

Posted
  • Author
Posted

Engine is sold. Still have twin apexi AX53B60 turbo's, z32 air flow meters with plugs and pods, nismo front/dump pipes, brembo brakes front/rear with rotors, Apexi power fc. Don't be shy to throw offers!

  • 2 weeks later...
pj-33 Experienced

pj-33

Posted
  • Author
Posted

Still have turbo's guys. Want to sell as a package with the front and dump pipes, will take $2,500.

2x z32 with plugs and apexi pods for $500.

Brembo Brake calipers/rotors/pads front and rear for $2,000.

BNR34 power FC no hand controller $700.

pj-33 Experienced

pj-33

Posted
  • Author
Posted

BUMP! Twin Apexi AX53B60 with all lines, nismo front and dump pipe $2,500. Very Responsive and good for 300-350AWKW depending on set up. I had 330AWKW on my R34 GTR on 19PSI

2x Z32's with apexi pods and plugs $500

Bremo brake calipers/pads/rotors $2,000.

Power FC no hand controller $700. Will throw in for free if you buy the lot.

Contact Pat 0425 717 715.

This is a good price guys, grab it while you can.

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      GTR R34 Limp Mode

      By GTSBoy · Posted

      Has equal chance of cleaning an AFM and f**king an AFM. I think you can work out what happened. When the Hitachi ECU sees the AFM die and goes into the associated limp mode, then it will start and run just fine, because it ignores the AFM and just runs on idle maps that will do what it needs to get it going. But there is no proper load signal, so that's about all it can do. My suggestion? If you don't want to go full aftermaket ECU, then get some R35 GTR AFM cards and some housings to put them in, in the stock location, and Nistune the ECU. Better to do a good upgrade than just replace shitty 40 year old tech with the same 40 year old tech.
    • steven7270
      GTR R34 Limp Mode

      By steven7270 · Posted

      So my car was recently having trouble starting on initial crank, I would need to feather the gas for it to start up but besides that it would start and run fine. So I clicked the idle air control valve (with throttle body cleaner) and cleaned the MAF sensors (with MAF cleaner). The start up issue was fixed and now the car turns over without the assist of the throttle, but the car is in limp mode and wont rev past 2.5k RPM. From what I understand the IACV would not put the car in limp mode, so I am to believe it is the MAF sensors, but it was running fine before and now I cant get it out of limp mode. I cleaned the MAF made sure the o rings were seated properly. Made sure the cables were plugged in properly, the cables also both read the same voltage. Does anybody know why this is or what could be causing this or how to get it out of limp mode?
    • Dose Pipe Sutututu
      SAUNSW - Cruise - Albion Park Aviation Museum - 9th August

      By Dose Pipe Sutututu · Posted

      Ooo I might actually come and bring the kids, however will leave the shit box home and take the daily
    • PranK
      Rusty roof repair

      By PranK · Posted

      Thanks. Yeah I realised that there's no way I'd be able to cover the holes with the filler, it would just fall through. Thanks again @GTSBoy!
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      That was the reason I asked. If you were going to be fully bodge spec, then that type of filler is the extreme bodge way to fill a large gap. But seeing as you're going to use glass sheet, I would only use that fibre reinforced filler if there are places that need a "bit more" after you've finished laying in the sheet. Which, ideally, you wouldn't. You might use a blob of it underneath the sheet, if you need to provide some support from under to keep the level of your sheet repair up as high as it needs to be, to minimise the amount of filler you need on top. Even though you're going bodge spec here, using glass instead of metal, the same rules apply wrt not having half inch deep filler on the top of the repair. Thick filler always ends up shitting the bed earlier than thin filler.
×
×
  • Create New...