Jump to content
SAU Community

Recommended Posts

hi everyone, just off loading some parts i've got.

standard intercooler 1st row a bit damaged but no leaks and in good working order $50

96xm3o.jpg

front pipe 2x 2.5 inch to a 3.5. $70

tasoj7.jpg

3.5 cat back stainless steel and big tip, exhasut some japan brand (ksp) $150 (makes a gtr sound like one!)

31447r9.jpg

under bonnet insulator $50 good condition.

110vm1y.jpg

polished can catch designed to fit infront of the battery with 2 m of hosing $100

2mwc9rs.jpg

standard overflow bottle $make an offer$

2wce3qu.jpg

extreme torque spilt controller for r32 gtr and gts4 $150

1538p5u.jpg

fibreglass rear pods $30 with need to been high-filled

zx7fxe.jpg

centre console lid $30 in good condtion

9rsn41.jpg

gear boot, new leather, $40

33e4phz.jpg

g4 just jap coilovers on good condition except one stud has been cross threaded a bit.$500

nismo fuel pressure regulator used for one month.$150

all parts can be picked up from thirlmere or kingsgrove. any questions call/sms me on 0422772841 or pm.

and some can be posted ask for a price.

Link to comment
https://www.sau.com.au/forums/topic/375719-syd-r32-gtr-stuff/
Share on other sites

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If you take the top half of the intake off you can unbolt the flap off the shaft and leave the shaft in there blocking the hole. Then you can remove the little vacuum canister off from under the manifold and get a spare vacuum line to run to the ECU. I can take some photos of it later. Probably best to get the vacuum source to the ECU sorted first though. Mine all worked mint with the base map from the GTT an I've pretty much let the closed loop sort the fueling and took 1 degree out of the whole timing map.
    • This IS something you also have to configure in Haltech (or at least I did in the past when going from onboard-to-ECU map sensor and an external MAP sensor in haltech land).
    • I'm hoping it's something as simple as the ECU is looking for an external MAP sensor, but he is trying to use the onboard MAP sensor.
    • You won't need to do that if your happy to learn to tune it yourself. You 100% do not need to do that. It is not part of the learning process. It's not like driving on track and 'finding the limit by stepping over the limit'. You should not ever accidently blow up an engine and you should have setup the ECU's engine protection to save you from yourself while you are learning anyway. Plenty of us have tuned their own cars, myself included. We still come here for advice/guidance/new ideas etc.  What have you been doing so far to learn how to tune?
    • Put the ECU's MAP line in your mouth. Blow as hard as you can. You should be able to see about 10 kPa, maybe 15 kPa positive pressure. Suck on it. You should be able to generate a decent vacuum to about the same level also. Note that this is only ~2 psi either way. If the MAP is reading -5 psi all the time, ignition on, engine running or not, driving around or not, then it is severely f**ked. Also, you SHOULD NOT BE DRIVING IT WITHOUT A LOAD REFERENCE. You will break the engine. Badly.
×
×
  • Create New...